FOR MANUAL PRESS HERE

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Shooting Chrony Remote Control for F1- M1 and Alpha Chronograph

Shooting Chrony  M1, F1 & Alpha chronograph can be operated from a distance using the cable button. This is the case of M1-F1-Alpha

Model	REMOTE CONTROL FOR SHOOTING CHRONY CHRONOGRAPH F1 M1 ALPHA
Length	244 cm
Weight	100 gr

GROUP OF 6 INDEPENDENT HOUSES IN ARONIADIKA KYTHIRON

BUILDING G

Once you enter in Aroniadika village, you should continue for 500 meters and you will find, on your left-hand, the big church of “Metamorphosis Tou Sotiros”. At that point you should turn left and after 150m you will meet, at your right, the group of 6 residences, before the church of “Agios Charalampos”. Leave your car at the parking of 280 M2, follow the central path of the plot and you will find the 3^d  residence, the building G, at your left.

Ιt is a two story-house built at the highest point of the plot with an amazing view. The ground-floor consists of a single-space used as kitchen, living room and dining room and a wc, which has a small storage place. In the first floor, there are 2 bedrooms, a small corridor and a bathroom. The residence is surrounded by a terrace. At the left of the home, there is the warehouse, which has a surface of  9 M2, leaned on the building through an arch.

The residence is surrounded by a “smooth” space of 260M2 and is divided from the rest of the plot through a low wall built by stones. 

BULDING	G
Area	87,6 Μ2
Storage room	9 Μ2
Land use	about 230 Μ2
1st floor	2 bedrooms + bathroom
ground floor	kitchen, living room, dining room and a wc
heating-cooling	There are ready lines for air condition and central heating
Water supply	Local network
Electricity	Local network
phone network	Yes
Windows and doors	hardwood double glazed
Parking places	1+1

FOR FACADE BUILDING PLANS CLICK HERE                FOR FLOOR BUILDINGS PLANS CLICK HERE

FOR MORE INFORMATIONS PLS CALL +30 6944 62 66 49

CARRYING CASE FOR CHRONY CHRONOGRAPH WITH PRINTER

Additional accessories to help complete the set-up of your chronograph, whether at the outdoor range or inside.

Model	Carrying Case for Chrony Chronograph & printer
Dimensions	16 x 17 x 12 cm
Weight	182 gr.
Material	nylon

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

SHOOTING  CHRONY PRINTER

Prints on plain paper, comes with 16 ft. interface cable and runs on 120V_AC Adapter, Output_6VDC (included) or 4-AA Batteries (not included). Can be placed anywhere on the Shooting Bench because it connects to the Chrony with a Cable (without needing light port alignments).

The SHOOTING CHRONY BALLISTIC PRINTER works with all Shooting Chrony Models and all Master Chrony Models, manufactured and sold since January 1, 2000, and, starting with Serial # 157288.

The following Chrony Models manufactured and sold prior to that date and Serial number also work with the CHRONY PRINTER: The Alpha, Beta and Gamma Shooting Chronys and the respective Master Chrony Models. Prints velocities as you shoot, and/or afterwards, when retrieving from memory. When done, push button, and Printer gives statistics, such as: LO, HI and Average velocity, Extreme Spread and Standard Deviation. Attach to target or file. It is a document. Printer also functions as a Remote Control . Weight: 1 lbs.; 4" x 7.5" x 1.75" high. 

Model	CHRONY PRINTER
Dimensions (closd) (l x w x h)	4” x 7,5’’ x 1,75’’
Weight	1 lbs
Alkaline Battery	6 Volt  (4 AAA) or transformer

FOR MANUAL PRESS HERE

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425