GROUP OF 6 INDEPENDENT HOUSES IN ARONIADIKA KYTHIRON
BUILDING B
Once you enter in Aroniadika village, you should continue for 500 meters and you will find, on your left-hand, the big church of “Metamorphosis Tou Sotiros”. At that point you should turn left and after 150m you will meet, at your right, the group of 6 residences, before the church of “Agios Charalampos”. Leave your car at the parking of 280 M2, follow the central path of the plot and you will find the first residence, the building A, at your left.
Ιt is a two story-house built at the highest point of the plot with an amazing view. The ground-floor consists of a single-space used as kitchen, living room and dining room and a wc, which has a small storage place. In the first floor, there are 2 bedrooms, a small corridor and a bathroom. The residence is surrounded by a terrace. At the left of the home, there is the warehouse, which has a surface of 9 M2, leaned on the building through an arch.
The residence is surrounded by a “smooth” space of 250M2 and is divided from the rest of the plot through a low wall built by stones.
BULDING
B
Area
87,6 Μ2
Storage room
9 Μ2
Land use
about 210 Μ2
1st floor
2 bedrooms + bathroom
ground floor
kitchen, living room, dining room and a wc
heating-cooling
There are ready lines for air condition and central heating
Water supply
Local network
Electricity
phone network
Yes
Windows and doors
hardwood double glazed
Parking places
1+1
FOR FACADE BUILDING PLANS CLICKHERE FOR FLOOR BUILDINGS PLANS CLICK HERE
FOR MORE INFORMATIONS PLS CALL +30 6944 62 66 49
VERNEY CARRON “ JET – 12 ”
An ideal weapon for those who want a gun for all hunts. Base from steel with 71 cm barrels, weight 3,000 kilos, stripe 7mm, pressure tested to 1370 and for steel shot magnum. Triggers 2 oil gun stock walnut. Extractors Supplied with 5 internal choke
Model
JET 12
Code order
Weight
3.000 kg
System
Cal.
12 cal. /76 magnum
Overall length
115 c m
Capacity
2
choke
5 chokes
Rib
7 mm
wood
Sanded and oiled walnut
Sling swivels
Provided
ejections
extractors
triggers
receiver
steel
stock
pistole
Proof tested
1370 + Steel shot proof tested.
Brunox® turbo-spray® 100ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,82 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
3 mPa s
Lubrication
Bruggertest DIN 51347 23 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-51 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Katana 9110 of period EDO (16th century).
9110
Code
Total length
92 cm.
Length of blade
64 cm
Length of handle
23 cm
Description
Wooden with bronze tsoumba and traditional knitting on the handle
1340 gram.
Material
Zinc alloy
There is not freight for delivery inτο Greece.
EXTENDER CARTEL PLUS 3”
EXTENDER CARTEL PLUS 3”is manufactured with strong aluminum and high modulus carbon wrapping.
SUPREME CX-250 STABILIZER 4” & 5”
Carbon
Dimensions
3”
gr.
Color
Βlack
Outsid diam.
17 mm
The freight, for all the deliveries to the Greek area is 6,00 euros
BUILDING Z
Once you enter in Aroniadika village, you should continue for 500 meters and you will find, on your left-hand, the big church of “Metamorphosis Tou Sotiros”. At that point you should turn left and after 150m you will meet, at your right, the group of 6 residences, before the church of “Agios Charalampos”. Leave your car at the parking of 280 M2, follow the central path of the plot and you will find the 1st residence, the building Z, at your right hand.
The residence is surrounded by a “smooth” space of 260M2 and is divided from the rest of the plot through a low wall built by stones.
Z
about 245 Μ2
FOR FACADE BUILDING PLANS CLICK HERE FOR FLOOR BUILDINGS PLANS CLICK HERE
BRUNOX LUBRI FOOD ® 50 ML
brunox® lubri-Food® High – Tec – Allrounder for the food industry
Product description Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).
Mode of working A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.
Application area All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.
Object To reduce friction and wear and therefore increases the life span of expensive food production equipment.
Application Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.
Apply a light, even film and allow BRUNOX® Lubri-Food® to react. Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result. Wipe off excess with cloth. BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Transparent
3 – 4 my
0,83 ± 0,02 g/cm3
85 mPa s
Bruggertest/DIN 51347 25 N/mm2
73 °C
film does non-hardening
up to 155 °C short time up to 125 °C permanent
Protection
-displaces humidity -stops limestone
below -20 °C
Can be used
for all metals
Specifications
- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
