DENIX 1007/G Colt army mod. 1860
The Colt army mod. 1860 .44 caliber, was constructed in 1860 by the Colt's Manufacturing Company, about 200.00 in parts and was in production until 1873. Designed by Samuel Colt and was used in the Civil War and the war with the Indians. It was a side weapon used by the cavalry, infantry and naval forces. They used the same frame as the Colt Navy 1851, were .36 caliber but open their chamber at .44. Was 6-bullets, single action and used rotating cylinder 0.454'' (11chil.). Entered the cylinder 30 grains of black powder and the copper percussion cap contained mercury to cause the explosion. The rear sight was a notch in the hammer, clearly visible only when the revolver was cocked The accurate was 70-90 meters and muzzle velosity was 900 feet per second.
Model
COLT Army model 1860
Code
1007/G
Weight
1.120 gr.
Dimension
37 cm
Color
Gray
Handle
Wood
Date of manufactoring
1860
AVAILABILITY
YES
The freight is including to the price for delivery inτο Greece.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
BENZAMIN TRAIL NP XL 1500
The XL1500 features a handsome, checkered, hardwood stock. With its daunting 24 ft-lbs of muzzle energy, and shot velocities of up to 1500 fps, small game - it's game over.
BENZAMIN TRAIL BT 1500 WNP
Caliber:
0.177" (4.5mm)
Scopeable:
Weaver
Velocity:
1500 fps
Buttplate:
Rubber
Loudness:
2-Med
Suggested for:
Target practice/Paste control
Barrel Length:
17,00 “
Trigger Pull:
3,5 lbs
Overall Length:
48.25”
Action:
Break barrel
Capacity:
1
Safety:
Manual
Cocking Effort
47 lbs
Power Plant:
Gas Piston
Barrel:
Rifled
Weight:
9.15 lbs
Front Sights:
-
Rear Sights:
Energy ft.lbs
25
Joules
33.9
Guaranty
1 year
Service-spare parts
Yes
FOR MANUAL PRESS HERE FOR SPARE PARTS DRAW PRESS HERE
The freight is including in the price for delivery in Greece. You must be 18 years old to buy an air gun
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.
Internal micrometer adjustments have positive internal locks. The FP is strong, rugged, dependable. The alloy used to manufacture this sight has a tensile strength of 85,000 pounds. Yet, the FP is light and compact, weighing only 1-1/2 ounces. For grooved receivers on Airguns and .22 rifles (Low line of sight)
Barracuda power
Heavy, exceptionally accurate pellet for long ranges. No lead-fouling, improved drive in barrel, no contact with lead thanks to special copper coating (20% harder than comparable lead pellets). First-class aerodynamic design for high impact and penetration. Low deformation of pellet. Tight shot groups. Smooth.
BARACUDA POWER
Τype
domed
Cal.
4,5 χιλ. (.177)
Head size
.177
Footsize [inches]
.187
0,68
Weight grains
10,19
10-Schot Grouping (inches) 25/50 yds
0.59" / 1.023 "
Ballistic Soap Penetration (inches)
7.67
B/C
0.02
Qty/box
300
Ideal field of use :
field target, paste control
Recommended type of weapon :
12-37 ft.lbs/ 16 - 50 j
Spares Lenses SHOOT OFF Classic
The freight is 6,00€, for all the deliveries into the Greek area.
Sight 5D series
Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)