CROSMAN OPTIMUS CO1K77

The NEW Optimus break barrel is both powerful and elegant. It features a handsome, ambidextrous hardwood stock. With a relatively light cocking force and a two-stage adjustable trigger the Optimus is built to get the job done with velocities of up to 1200 fps with alloy pellets. The barrel incorporates a micro-adjustable rear sight and fiber optic front sight.

CROSMAN OPTIMUS CO1K77
Caliber:	0.177" (4.5mm)	Scopeable:	11mm dovetail
Velocity:	1000-1200 fps	Buttplate:	Rubber
Loudness:	3-Medium	Suggested for:	Small game hunting/target practice
Barrel Length:	18.42	Trigger Pull:	4,00 lbs
Overall Length:	44.5	Action:	Break barrel
Capacity:	1	Safety:	Manual
Cocking Effort:	31,5 lbs.	Power Plant:	Spring-piston
Barrel:	Rifled	Weight:	6.02 lbs
Front Sights:	Fiber Optic	Rear Sights:	Adjustable for windage and elevation
Energy ft.lbs	18	Joules	24,12
Guaranty	1 year	Service-spare parts	Yes

FOR MANUAL PRESS HERE                                       FOR SPARE PARTS DRAW PRESS HERE

The freight is including in the price for delivery in Greece.
You must be 18 years old to buy an air gun

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY

ARIZONA NOCK - PLASTINOCK

AAE's Plastinock's have a double snap design that gives a positive string fit that allows the arrow to leave the bowstring smoothly.

Longer ears and angled throat design keeps the nock on the bowstring at any string angle.  A thin base gives the nock a perfect blend to the arrow shaft.

Available in: 1/4", 9/32", 5/16" or 11/32"

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

EASTON X NOCK

Internal  nock for arrows of the series Inspire with spine & 570 and 630 and series X10

The freight, for all the deliveries to the Greek area is 6,00 euros

Centerpoint 1pc Off-set Dovetail Rings for 1" Scopes

Model	CPM1PA - 250OF.
Color	black
Gun Base	3/8’’ dovetail
Style	1-Piece
Ring Diameter	1’’
Profile	High
Min Inner Objective	56 mm.
Max Outer Objective	67 mm.
Integral Base Length	62 mm.
Ring Width	18 mm.
Saddle Height	21 mm.
Screws per Ring	4
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)