Werner Beiter arrow rest for recuvre
The Beiter Rest for Recurve is the first Arrow Rest designed by Werner Beiter which will be sold on the archery market.
Years of testing, many prototypes, hundreds of High Speed Films have helped to develop this first Beiter arrow rest for Recurve Bows.
Some very important notes about the Beiter Rest for Recurve:
it has been designed to be used for both left- and right-handed archers!
it may be changed within seconds, for example from Carbon- to Aluminum-Shafts !
a scale on the Support allows a re-producable position of the Finger. Therefor the height adjustement of the Beiter Rest is extremely precise: the Nocking Point can be raised or lowered within seconds and by less than 1mm!! The position of the arrow on the Plunger Tipp as well!!
the Beiter Rest for Recurve makes no noise! (according to our test archers!)
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
CARTEL ARROW REST METAL
Arrow Rest cartel metallic for right or left handed
Cartel Arrow Rest Flipper Double
BEITER INSERT NOCK
The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular specially on Aluminum-Carbon Arrows..
The Beiter Insert-Nock is available in both the Beiter patented ASYMMETRIC shape, as well as in the SYMMETRIC Hunter-Nock. Remember to shoot with the Beiter logo on top!
Some features of Beiter Nocks, that distinguish them from other makes:
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.
The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.
BEITER INSERT NOCK 19/1 & 19/ 2
19/1
19/1 Heavy
19/2
19/2/Heavy
19/2 Hunter
Weight gram.
0.53
0.62
0.60
0.69
0.70
Weight grains
8.154
9.538
9,231
10,615
10.769
Diam.
6,25 χιλ
Package
1 piece
SF V-BAR 45° AXIOM
V-BAR SF AXIOM 45°
Material
Anodised aluminum
Dimensions
7,5 x 2,5 cm
Weight
93,50gr.
Color
Βlack
Opening angle
45°
