AAE ARIZONA VANES BULK EP-50

Made from super tough material with great durability.

Textured surface for better steerage and speed.

Vane base is pre treated with activator for improved and faster adhesion.

Wide range of bright and eye-catching colours.

The freight, for all the deliveries to the Greek area is 6,00 euros 

 BOHNING VANES X-SHIELD 2.25"

·         Designed with the needs of FITA  target and field archers in mind

·         Made from Bohning's super-durable Blazer material

·         Wide base makes it easy to fletch with these vanes

·         Already coated with Bohning's primer, which is designed to react with glues for a super secure fit 

·         Wide range of colours to match your style

·         National flag designs available

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BOHNING VANES IMPULSE 4"

Specially designed for those shooting recurve, although has also proven popular among compound archers

Made from a lightweight, composite material - 50% lighter than Bohning's standard material

Super low profile shape for better clearnace and great resistance to strong crosswinds

Very durable

Already coated with Bohning's primer, which is designed to react with glues for a super secure fit

Popular choice in all forms of outdoor archery (not designed for use with broadheads)

Wide range of colours to match your style

The freight, for all the deliveries to the Greek area is 6,00 euros 

Distance Holder

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...

 The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use.

The Beiter Distance Holder can be used in different ways:

 inserted in the cable-guard, if you have to serve in the area of the cable-guard itself.

 with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!!

with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros