BEITER CARBON EXTENDER 5 ΄΄

The Extender of the Beiter Centralizer is a extension for the Beiter V-Bar - if you choose the model with Position Pins - or for most other V-Bars on the market - if used without pins. Beiter Extender can be ordered in 3", 4" or 5", without or with 1 Tuner (4" and 5" only).

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

EXTENDER CARTEL PLUS 3”

EXTENDER CARTEL PLUS 3”is manufactured with strong aluminum and  high modulus carbon wrapping.

Bohning Hot Melt Cool Flex

• Designed for points & inserts  • Works with aluminum, carbon & wood shafts  • Low temp hot melt adhesive  • Fully cured in cold water & hot water reversible  • Excellent for use when tuning broadheads1 12 gram stick will do approximately 144 inserts.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros