ARCTEC CROSSTUBE STABILIZER LONG

Features Arctec Crosstube stabilizers:

·         Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness

·         Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.

·         Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)

·         Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)

·         Very low susceptibility to wind by only 16mm diameter – independent of wind direction

·         Easy fine-tuning made possible through stainless steel or aluminium weights

·         The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)

·         Packaging doubles as a protective cover (transparent  tube)

·         Handmade in Germany (Solingen)

Specifications:

·         Small-diameter three carbon layer using cross development technology rod with only 16mm diameter.

·         Weight: 140 grams at 32" (without weights and damper) - the stiffest rod with this small diameter on the market - 1/4" Arctec modular damping system - stainless steel weight (35 gram) and end weight (45 gram) included.

·         Optional aluminium weights with 15 grams available.

Available lengths:

·         Extender in 3", 4" and 5"

·         Side-rod in: 8", 10", 12" and 14"

·         Long-rod in: 28", 30", 32", 34" and 36"

 SPECIAL ORDER

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

SET STABILIZER AVALON  30 ΄΄

SMC-A-ST01-30RD

STABILIZERS CARBON LONG ROD

CLASSIC ST-01

- Color: black/grey

- Diameter: 18mm

- Size: 30"

- Weight:

 - incl. damper, flat weight and cap weight

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros