CUSTOM BOW STRING FLEX 8190 3 colors

Our Custom Series are the next step in bowstring performance. No over servings, tight measurements, served under high tension for consistent, uniform response in your recurve bow and a distinctive feature of high quality strings, are standard on the Custom Series series strings.  
For use on all recurve competition bows.
Guide for order:
-Select Filament material :  Select the material you choice, 8125G, 8190, ASTRO FLIGHT,  ANGEL MAJESTY PRO or BCY-X
Select 8125G, 8190 or Angel Majesty-Pro for speed
Select Astro for a compromise of speed and stability
Select BCY-X for stability performance.
-Select bow size : It´s determinate by the riser and limbs sizes. If you are not sure, send us an email for help.
-Select bows string size: for same bow size, it´s more than possible different configurations by brands and riser-limb sets.  
The rule is :
-Standard sizes ( *only as reference): 64"-154cm , 66"-159cm, 68"-164 cm , 70"-169cm, 72"-174cm
-Hoyt Formula ( *only as reference) bows need 2 cm more than standard sizes.
If you have an old strings you can measure from end to end  at the internal side of the loops. This can help as start point.
We measure our strings under 50 kilos tension with two 8mm post  on the loops.
-Select number of strands : Regular basis: less strands = more speed, but more vibrations and elongation problems with high poundages.  For low poundage ( less than 34) select the lowest number of strands. For High poundage ( more than 40 pounds )  select the highest number of strands.  Always real poundage.
-Select nock size  you intended to use on the string.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BONDHUS allen WRENCH SET FOLDING

Set of imperial allen (inches) keys.

·         Includes key sizes commonly used by archery manufacturers.

·         Compact design ideal for keeping in a quiver.

The greatest advantage of a fold up is the convenience of range of blade sizes in one package. It’s also easily and conveniently carried in a pocket

The GorillaGrip® fold up handle is 40% stronger than steel, and will not rust or corrode

Patented handle design makes every job faster and easier

Handle is comfortable to hold, and does not conduct heat or cold

With the blade in the 180 degree position, a fold up can be used like a screwdriver

Blades open up to 270 degree from handle. Molded in stops then hold blades securely in place

With a blade in the 270 degree position, a fold up can be used for spinning a fastener in or out

Tool user can adjust tool tension

GorillaGrip® fold ups do not have ball end tips smaller than 5/32 and 4mm, since the handle could easily over-torque the blades and risk breakage