|
|
BEITER TRI LINE
|
|
BEITER TRI-LINER FOR SPIN-WINGS
The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter.
With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
|
35,00EUR
|
|
|
|
|
CHRONY M1
|
|
SHOOTING CHRONY M -1
Gives Numbered Shot Velocities; + Velocity stays on display until you shoot again; + Uses 9 Volt Alkaline Battery with 48 hours of continuous use; + Stereo Jack for optional Remote Control or Chrony Ballistic Printer. The Chrony Ballistic Printer, will also function as a Remote Control. It prints velocities as you shoot and, on real paper. When done shooting, press STAT button on Printer and it will print Hi, Low and Average-velocities, Extreme Spread and Standard Deviation. !! This information becomes available only if and when the F-1 Chrony is used together with the Remote Control or the Chrony Ballistic Printer. !! + Upgrades to Alpha, Beta or Gamma Shooting Chrony or Master Chrony
|
Model
|
CHRONY M-1
|
|
Speed measurement
|
Feet per second
|
|
Max. number of shots / Measuring
|
32
|
|
Material
|
20 gauche steel
|
|
Dimensions (closd) (l x w x h)
|
19,05 cm x 11,45 cm x 7,00 cm
|
|
Weight
|
1.150 gr
|
|
Alkaline Battery
|
9 Volt
|
FOR MANUAL PRESS HERE
The freight is including in the price for delivery in Greece.
The tripod is not including to the price
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
|
170,00EUR
|
|
|
.JPG&w=140&h=110&far=C&bg=fbecd7&& "DECUT ARROW CUTTER BOSCUT")
|
|
DECUT ARROW CUTTER BOSCUT
|
|
DECUT Arrow Cutter BOSCUT
Mobile high precision and international reputation of the product for many years, good quality, after the materials are aluminum anodic oxidation on the laser carving.Is one of the classic DECUT products.There are difference between 110 v and 220 v respectively.The motor speed of 6000 rotations per minute (RPM).Can ensure the cutting surface is smooth, when cutting is suitable for carbon arrows, aluminum, etc.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
|
170,00EUR
|
|
|
|
