BEITER  OUT  NOCK

The Beiter Out-Nock has been mainly designed for Carbon Arrowshafts, but can be used on some Aluminum-Carbon Arrows as well. The Beiter Out-Nock is available exclusively in the Beiter patented ASYMMETRIC shape.

 Remember to shoot with the Beiter logo on top!Some features of Beiter Nocks, that distinguish them from other makes:

 Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.

The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.

FOR MORE INFORMATION HERE 

ARCTEC CROSSTUBE STABILIZER LONG

Features Arctec Crosstube stabilizers:

·         Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness

·         Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.

·         Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)

·         Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)

·         Very low susceptibility to wind by only 16mm diameter – independent of wind direction

·         Easy fine-tuning made possible through stainless steel or aluminium weights

·         The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)

·         Packaging doubles as a protective cover (transparent  tube)

·         Handmade in Germany (Solingen)

Specifications:

·         Small-diameter three carbon layer using cross development technology rod with only 16mm diameter.

·         Weight: 140 grams at 32" (without weights and damper) - the stiffest rod with this small diameter on the market - 1/4" Arctec modular damping system - stainless steel weight (35 gram) and end weight (45 gram) included.

·         Optional aluminium weights with 15 grams available.

Available lengths:

·         Extender in 3", 4" and 5"

·         Side-rod in: 8", 10", 12" and 14"

·         Long-rod in: 28", 30", 32", 34" and 36"

 SPECIAL ORDER

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Distance Holder

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...

 The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use.

The Beiter Distance Holder can be used in different ways:

 inserted in the cable-guard, if you have to serve in the area of the cable-guard itself.

 with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!!

with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Tanto 4006  of  EDO period.

Model	4006
Code	4006
Total length	49 cm.
Length of blade	32 cm
Length of handle	16 cm
Description	Wooden with bronze tsoumba and ornaments.
Weight	700 gram.
Material	Zinc alloy

There is not freight for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

DENIX 736

 Replica MΚ ΙΙ or Pineaple Hand Grenade Replica. From the 2^nd World War. Antique finish steel construction.

Model	GRENADE with LIGHTER 736
Code	736
Weight	463 gr.
Dimension	12 cm
Color	Gray
Date of manufactoring	2nd World  War
AVAILABILITY	YES

The freight is 6,00€  delivery into  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

VERNEY CARRON    “SAGITTAIRE SUPER LEGER EXTRA LUXE”

The version of Super Leger based from ergal, with side plates and barrel length 66 cm, weight ≈ 2,700 pounds rib 7mm, proven in 1370 and pressures for steel shot. Triggers 2, the first one works like single trigger. Oil stock, pistol or English, walnut. Extractors Barrels from steel super diamond, forged steel cold. Supplied with 3 choke internal

Model	SAGITTAIRE SUPER LEGER
Code order	262 CX 66 P/A
Weight	2.700 kg
System	Changable pins in front and conikal rear
Cal.	12 cal. /76 magnum
Overall length	110 c m
Capacity	2
choke	3 chokes
Rib	7 mm
wood	Sanded and oiled walnut
Sling swivels	Provided
ejections	extractors
triggers	2
receiver	ergal
stock	pistole (for english add 75,00 €) and for LEFT add 149,00 €
Proof tested	1370 + Steel shot proof tested.