POINTS FOR EASTON CARBON ONE

Internal points for EASTON arrows CARBON ONE, with possibility of adjusting the length of the shaft and the weight

The freight, for all the deliveries to the Greek area is 6,00 euros 

Ram Machine Arrow Spine Tester Carbon

Sort your arrows for perfect consistency of spine (dynamic stiffness).

Precisely index arrow nocks to the stiffest portion of the arrow shaft for the tightest groups.

Check the concentricity of your point to an amazing +/-.0005" for a super accuracy.

Measure the straightness of arrows from the tip to tip.

Monitor the degradation of arrow spine over the course of the season to catch problems before they show up on your score card.

Provide your customers with a valuable service, the ultimate in arrow accuracy.

MTR 77 NP -177 Rifle (.177)

Folding rifle, copy of the US Army's gun, rifled steel barrel, adjustable sights, with a synthetic stock and carrying handle. Works with nitrogen piston

CROSMAN MTR 77 NP  Rifle (.177)
Caliber:	0.177" (4.5mm)	Scopeable:	picatinny
Velocity:	1000-1200 fps	Buttplate:	Plastic
Loudness:	94,5 db	Suggested for:	Target practice
Barrel Length:	15΄΄	Trigger Pull:	45 lbs
Overall Length:	40 ΄΄	Action:	Break barrel
Capacity:	1	Safety:	Manual
Cocking Effort:	45 lbs	Power Plant:	Nitro piston
Barrel:	Rifled	Weight:	6,1 lbs
Front Sights:	Adjustable for windage and elevation	Rear Sights:	Adjustable for windage and elevation
Guaranty	1 year	Service-spare parts	Yes

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.

MARTO SHRASAYA 201

The sirasagia were swords battle but when a blade should be stored for long, then the ADAPT a wooden handle and sheath made ​​of natural wood nurizaya to be able to preserve moisture and time.
Handmade katana by Marto, in Toledo Spain steel type AISI 420. It made ​​the process of forging and heat. The blade does not rust and does not need further care. The casing is made of wood with Japanese symbols on the handle and the tray ...

Model	SHRASAYA 201
Code	201
Total length	27,36  ΄΄
Blade length	17.96 ΄΄
Handle length	6,30΄΄
Weight	1,57 lb
Material	Forged Steel AISI 420

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

AVALON TYRO  Case Recurve

ECONOMIC CASES IN INJECTED POLYPROPYLENE

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 15,00 euros 

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
For orders > 75 euro we include the freight in the prices, for all the deliverys to the Greek area.