TAS Pine shafts - 5/16, 32"

TAS Cedars shafts - 5/16,   32"

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Τhe freight is 6.00 euro for deliveries into the Greek area.

Distance Holder

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...

 The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use.

The Beiter Distance Holder can be used in different ways:

 inserted in the cable-guard, if you have to serve in the area of the cable-guard itself.

 with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!!

with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

RISER HOYT XAKT

• Earl Hoyt Geometry
• Dynamic Flex Control Engineering
• Adjustable Pivot Block for obtaining perfect alignment
• Hoyts Pro Series Grip

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

We include the freight in the prices, for all the deliveries to the Greek area.

StringFlex Bowstring Classic with Finger Protector

StringFlex offer a pre-assambled Classic bowstring  with our Finger Protector  on the string.

Avalaible in black CLASSIC   polyester  bowstrings and in popular bow sizes. Anyway , we can make every thing.

Include a brass nocking point for fix the position.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

CROSMAN OPTIMUS CO1K77

The NEW Optimus break barrel is both powerful and elegant. It features a handsome, ambidextrous hardwood stock. With a relatively light cocking force and a two-stage adjustable trigger the Optimus is built to get the job done with velocities of up to 1200 fps with alloy pellets. The barrel incorporates a micro-adjustable rear sight and fiber optic front sight.

CROSMAN OPTIMUS CO1K77
Caliber:	0.177" (4.5mm)	Scopeable:	11mm dovetail
Velocity:	1000-1200 fps	Buttplate:	Rubber
Loudness:	3-Medium	Suggested for:	Small game hunting/target practice
Barrel Length:	18.42	Trigger Pull:	4,00 lbs
Overall Length:	44.5	Action:	Break barrel
Capacity:	1	Safety:	Manual
Cocking Effort:	31,5 lbs.	Power Plant:	Spring-piston
Barrel:	Rifled	Weight:	6.02 lbs
Front Sights:	Fiber Optic	Rear Sights:	Adjustable for windage and elevation
Energy ft.lbs	18	Joules	24,12
Guaranty	1 year	Service-spare parts	Yes

FOR MANUAL PRESS HERE                                       FOR SPARE PARTS DRAW PRESS HERE

The freight is including in the price for delivery in Greece.
You must be 18 years old to buy an air gun

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY

BOHNING GLUE

  Works on vanes, feathers, points, inserts & nocks

 • Works on all shaft surfaces

 • Clamp time 4 minutes, Full cure time 48 hours

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros