EASTON STABILIZER CONTOUR CS LONG

DESCRIPTION
The New Easton Contour CS Stabilizer features the most extreme stiffness to weight ratio we have ever developed for a stabilizer. Featuring aerospace-grade graphite fiber, the Contour CS is optimized for shooters looking for the stiffest possible stabilizer with superior hold and a wind-cheating slim profile for rock-solid aiming. Contour CS—the most advanced stabilizer ever, from the company that pioneered carbon stabilizers.

SPECIFICATIONS

·         Optimized high stiffness for steady aiming

·         Tri-Mod AVID (Advanced Vibration Integrated Damping) Geometry for shock management

·         360 Degree Windcutter profile reduces wind effect

SPECIAL ORDER

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 EASTON STABILIZER Z-FLEX LONG

ABOUT THE PRODUCT

All-new Z-Flex provides extreme stiffness and high-moment weight system compatibility with minimum aiming float. AVRS chamber for rapid vibration amplitude dissipation after the shot. Z-Flex is compatible with the 5/16″-24 flat vari-weights.

SPECIFICATIONS

•      Ultra-stiff design for steady aiming
•  AVRS damping for active-shock management
• Lowest mass and highest efficiency

  SPECIAL ORDER

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

STABILIZER BEITER

As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
 
Beiter Centralizer Long Rods are available with Endcap in following lengths: 8¨ - 10¨-12¨

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

BRUNOX Gun Care ® can 300 ml
for hunting-, sporting-, professional and collecting-guns

- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat

•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).

•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.

•Prevents from leak currents as contact spray.

The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.

Physical Properties
BRUNOX® Turbo-Liquide with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,81 ± 0,03 g/cm3	Expect Coverage	approx. 100 – 110 m2/l
Viscosity (20oC)	3,6 mPa s	Lubrication	Bruggertest DIN 51347 22 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-54 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Gillo Stabilizer Short GS7 Carbon

Gillo Stabilizer Short GS7 Carbon

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros