H&N Finale match 4.50 mm pellets
The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.
A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!
Model
FINALE MATCH RIFLE 4,50
Τype
match
Cal.
4,5 χιλ. (.177)
Head size
4,50 χιλ.
Weight
0,53
Weight grains
8,18
Qty/box
500
Ideal field of use :
competition use
Recommended type of weapon :
5,5 ft.lbs / 7,5 j
Specifications* Test Rifle: Walther LG300 (7,5 J); distance 10m
Cal. .177 (4,5mm)
Muzzle
10m
30m
Velocity (m/s)
175
-
Kinetic Energy (J)
7,5
Ballistic Soap Penetration (mm)
Ballistic Soap Expansion (mm)
10-Shot Grouping (mm)
5,0
Pellet Weight (g)
Headsize (mm)
4,50
Footsize (mm) 4,75
4,75
B/C
0,010
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor Application and effect • high-quality lubricant • long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required. It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
olive-yellow
Expect Coverage
approx. 40 m2/l with 5 my
0,838 ± 0,02 g/cm3
25 mPa s – 120 mPa s thixotrop
Bruggertest/DIN 51347 48 N/mm2
Aerosol:<0 °C Bulk: 51 °C
film non-hardening
up to 150 °C short time up to 100 °C permanent
below -41°C
evaporation of the solvents within 2-4 h Hdepending on weather conditions
neutral
Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
penetrating
5 – 20 my
No -silicon -resins, -PTFE - acids
The freight is 6,00 € for delivery into the Greece area.
.25 Caliber Marauder Rifle Magazine
Ten shot auto-indexing magazine for the .25 caliber Marauder Rifle.
code
RC 2508
description
cylinder MARAUDER 6.35 mm
capacity
8 shot
material
plastic
qty
1 piece
Availability
YES
Target holder for airgun
code 800.014 description Target material Metallic Papper target dimensions 14*14 qty 1 piece Availability YES
800.014
Target
Metallic
Papper target dimensions
14*14
code 800.017 description Target material Metallic Papper target dimensions 17 * 17 qty 1 piece Availability YES
800.017
17 * 17
H&N Finale match 4.49 mm pellets
FINALE MATCH RIFLE 4,49
4,49 χιλ.
4,49
Magazine Α9000 – A2002 – A1001
ΓΕΜ Α300
Magazines for A3000 – A3000LB – A3003
22 shot