Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

PUMA TEC 7311244

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32

Tel. 0030 210 5225 007 - 0030 210 5234 425 

Distance Holder

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...

 The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use.

The Beiter Distance Holder can be used in different ways:

 inserted in the cable-guard, if you have to serve in the area of the cable-guard itself.

 with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!!

with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

CARTEL ARROW PULLER MIDAS

Pull of ergonomics design that you can pull out arrows safely and easily

The freight, for all the deliveries to the Greek area is 6,00 euros 

Eickhorn KM2000-BW

The official combat knife of the German armed forces with the NATO supply number 1095-12-355-6742. Double sided Tanto blade made of 1.4110 stainless steel with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. – M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g.

LINDER EICKHORN KM 2000 825101
Code	825101
Length of blade	4.8 “.
Blade	Boehler N695
Blade thickness	5 mm
Hardness	57 HRC
Total length	11.90 “
Length of handle	5.10 “.
Weight	330 gram.
Handle	Fiberglas
Sheath	Synthetic (including)

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

CONVEX MACHETE 449045
Code	449045
Length of blade	18.00 “.
Blade	SS
Blade thickness	4 mm
Hardness	-
Total length	24 “
Length of handle	6 “.
Weight	716 gram.
Handle	Wood
Sheath	Cordura  (including)

The freight is 5,00 € for delivery into  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BEITER TRI-LINER FOR SPIN-WINGS

The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter. 
With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

AVALON ARROW PULLER

Pull of ergonomics design that you can pull out arrows safely and easily

The freight, for all the deliveries to the Greek area is 6,00 euros