WIN&WIN STABILIZER WIAWIS ACS NANO LONG

DESCRIPTION

• Made of reinforced high strength and anti-resistance foam
• Enhances stiffness and stability with wider tapering than present HMC Plus rods
• V-bar connecting bolt was eliminated (reducing weight by 40 grams) by integrating the bolt within the stabilizer
• Reducing the weight on the back side allowed for 25 grams to be added on the opposite end
• The center of gravity has been moved forward to eliminate unnecessary movement and reduces vibration more efficiently
• The new technology creates the most efficient stabilizer system by reinforcing the performance of present HMC Plus stabilizers

                SPECIAL ORDER

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Hephaestus Stabilizer Weights 4oz

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area. 

 DOINKER STABILIZER LONG ESTEMO PLATIN HI-MOD EXO

DESCRIPTION

Featuring our (MS1) Suppression Mount Technology, a vibration dampening system that has an internal steel weight suspended by two Doinker ITP material dampeners at opposing ends.....reducing residual vibration.

Due to it's .640" outside diameter, this Hi-Mod Carbon is ideal for outdoor shooting situations where wind may be a concern, without sacrificing strength for supporting a large amount of weights for optimum stability.

The modular ALL NEW eXo Doinker gives maximum vibration absorption, while providing the strength to easily hold 15 ounces or more of weights.

 SPECIAL ORDER

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

POUCH AVALON TEC - X

-Release or Finger Tab Pouch

-Color: Blue

-Durable Diamond Fabric

-Ultra Soft Fleece lining

- Quick draw closure

-Inner divider separator

-Webbed loop to easily attach to a belt

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros