Brunox® turbo-spray® 400ml

5 function - spray with Turboline

Application
for
• maintenance •cleaning • repair works
• production • storage • transportation

of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds

BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).

Application and effect

Lubricant

BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.

Creep oil / Rust loosener

BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.

Anti-corrosion

BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.

Cleaning agent

BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.

Contact spray

BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.

properties

BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC

Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,82 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	3 mPa s	Lubrication	Bruggertest DIN 51347 23 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-51 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

CUSTOM BOW STRING FLEX 8190 3 colors

Our Custom Series are the next step in bowstring performance. No over servings, tight measurements, served under high tension for consistent, uniform response in your recurve bow and a distinctive feature of high quality strings, are standard on the Custom Series series strings.  
For use on all recurve competition bows.
Guide for order:
-Select Filament material :  Select the material you choice, 8125G, 8190, ASTRO FLIGHT,  ANGEL MAJESTY PRO or BCY-X
Select 8125G, 8190 or Angel Majesty-Pro for speed
Select Astro for a compromise of speed and stability
Select BCY-X for stability performance.
-Select bow size : It´s determinate by the riser and limbs sizes. If you are not sure, send us an email for help.
-Select bows string size: for same bow size, it´s more than possible different configurations by brands and riser-limb sets.  
The rule is :
-Standard sizes ( *only as reference): 64"-154cm , 66"-159cm, 68"-164 cm , 70"-169cm, 72"-174cm
-Hoyt Formula ( *only as reference) bows need 2 cm more than standard sizes.
If you have an old strings you can measure from end to end  at the internal side of the loops. This can help as start point.
We measure our strings under 50 kilos tension with two 8mm post  on the loops.
-Select number of strands : Regular basis: less strands = more speed, but more vibrations and elongation problems with high poundages.  For low poundage ( less than 34) select the lowest number of strands. For High poundage ( more than 40 pounds )  select the highest number of strands.  Always real poundage.
-Select nock size  you intended to use on the string.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

StringFlex Classic Traditional Dacron

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

EASTON G PIN NOCK

Precision-molded, Press-fit Indexable.Fits all nock pins, for X10 and A/C/E shafts.Colors: Green, red, orange, lemon lime, crystal  and blue. Weight 4 gr.

 Bohning Hot Melt Ferr-L-Tite

Designed for points & inserts. Works with aluminum & wood shafts.  Heat reversible for adjustment, replacement or removal.    1 12 gram stick will do approximately 144 inserts.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BEITER PIN OUT NOCK X-10 145/2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros