|
ΒΡΘΝΟΧ® GUN CARE LIQUIDE 100 ML
|
BRUNOX Gun Care ®
for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).
•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.
•Prevents from leak currents as contact spray.
The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
Physical Properties
|
BRUNOX® Turbo-Liquide with TURBOLINE –
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
Specific Gravity
|
0,81 ± 0,03 g/cm3
|
Expect Coverage
|
approx. 100 – 110 m2/l
|
Viscosity (20oC)
|
3,6 mPa s
|
Lubrication
|
Bruggertest DIN 51347
22 N/mm2
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
Freezing Point
|
-54 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
5,24EUR
|
|
|
|
BRUNOX LUBRI FOOD 50 ml
|
BRUNOX LUBRI FOOD ® 50 ML
brunox® lubri-Food®
High – Tec – Allrounder for the food industry
Product description
Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).
Mode of working
A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.
Application area
All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.
Object
To reduce friction and wear and therefore increases the life span of expensive food production equipment.
Application
Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.
Apply a light, even film and allow BRUNOX® Lubri-Food® to react.
Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result.
Wipe off excess with cloth.
BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.
Physical Properties
|
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
|
Appearance
|
Transparent
|
Film Thickness
|
3 – 4 my
|
Specific Gravity
|
0,83 ± 0,02 g/cm3
|
Expect Coverage
|
approx. 100 – 120 m2/l
|
Viscosity (20oC)
|
85 mPa s
|
Lubrication
|
Bruggertest/DIN 51347
25 N/mm2
|
Flashpoint
|
73 °C
|
Consistence of the film
|
film does non-hardening
|
Heat Resistance
|
up to 155 °C short time
up to 125 °C permanent
|
Protection
|
-displaces humidity
-stops limestone
|
Freezing Point
|
below -20 °C
|
Can be used
|
for all metals
|
pH-Value
|
neutral
|
Specifications
|
- NSF H1 registered
N° 136783 and N° 137856
- drinking water certificate
- froth certificate
- Kosher certificate
- contains no: silicon, PTFE,
resins, acids
|
Film Property
|
penetrating
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
5,54EUR
|
|
|
|
BEITER CLICKER BLACK BLADE GM
|
Beiter Clicker
The clicker is the accessory that serves in Sagittarius, so to understand when the arrow has come to release position. This is achieved thanks to the sound produced by the steel sheet metal that is released when the arrow comes in this position.
The Beiter Clicker has been used and appreciated since its introduction, thanks to the fact that it suits almost all Handles on the market, due to the different available models. Different colours of the Klicker Blade and many different components can individually adapt the Klicker to the archer's needs.
For more informations please press here
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
5,54EUR
|
|
|
|
ΒRUΝΟΧ® ΙΧ 100 SPREY 300 ML
|
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
|
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
|
Appearance
|
olive-brown
|
Before use
|
shake well
|
Specific Gravity
|
0,886 ± 0,044 g/cm3
|
Dilutable
|
Can be diluted with White Spirit or Napar
With Dilution the corrosion protection interval will be also reduced.
|
Viscosity (20oC)
|
158 mPa s – 1580 mPa s thixotrop
|
Flashpoint
|
spray:<0 °C
bulk: 41 °C
|
Heat Resistance
|
max. 79 °C
|
Can be used
|
for all metals
|
Freezing Point
|
below -13 °C
spray below -41 °C
|
Drying Time
|
Not apply on humid surfaces.
Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®.
HDepending on weather conditions:
-dust-dry after approx.
1-2 h,
-hardened after approx. 12 h
|
pH-Value
|
Neutral
|
Film Property
|
Sealing
|
Film Thickness
|
25 – 50 my
|
Expected Coverage
|
ca. 20 m2/l with 25 my
|
Lubrication
|
no
|
Corrosion
Protection
|
depending on application up to 5 years
|
Consistence of the film
|
wax protection film
|
Specifications
|
No – silicon, PTFE
|
|
|
8,07EUR
|
|
|
|
BEITER PIN NOCK #2
|
BEITER NOCKS PIN ASYMMETRIC #2
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
BEITER PIN NOCK #2
|
Weight
|
5,247 gr
|
Colors
|
Green, Orange, White, black, blue, purple, clear, orange
|
Package
|
1 piece
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
1,23EUR
|
|
|
|
PIN VICTORY FOR TARGET SHAFT
|
VICTORY PIN FOR TARGET
Package
|
1 piece
|
Weight
|
12 grains
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
1,20EUR
|
|
|