STABILIZER BEITER

As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
 
Beiter Centralizer Long Rods are available with Endcap in following lengths: 26”, 28”, 30”, 33”, 35”, 37”, 41”, 45”; according to their length these can be ordered with 2, 3, 4 or 5 tuners.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Η&Ν Field Target  Trophy Green  5,50

Lead-free, lightweight high-velocity pellet with exceptional accuracy for competition and hunting. Supersonic and with very flat trajectory for medium ranges. No lead-fouling, improved drive in the barrel, no contact with lead thanks to special tin alloy. First-class aerodynamic design for high impact. Tight shot groups. Smooth.

Model	FIELD TARGET TROPHY GREEN
Τype	domed with flat trajectory ,alloy
Cal.	5,5 χιλ. (.22)
Head size	5,50 mm.
Weight	0,65
Weight grains	10,03
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥18 ft.lbs/ 25 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Barracuda power

Heavy, exceptionally accurate pellet for long ranges. No lead-fouling, improved drive in barrel, no contact with lead thanks to special copper coating (20% harder than comparable lead pellets). First-class aerodynamic design for high impact and penetration. Low deformation of pellet. Tight shot groups. Smooth.

Model	BARACUDA POWER
Τype	domed
Cal.	5,5 χιλ. (.22)
Head size	.22
Footsize [inches]	-
Weight	1,27
Weight grains	21,14
10-Schot Grouping (inches) 25/50 yds	-
Ballistic Soap Penetration (inches)	-
B/C	-
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	12-37 ft.lbs/ 16 - 50 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

CROSMAN 22BHPA airgun pellets  

Premier quality and accuracy for .22 caliber airgun hunters! Single die production for exceptional shot-to-shot consistency.

Assortment includes 100 each of the highest quality pellets:

• Domed Magnum 14.3 grain • Hollow Point 14.3 grain • Super Point 14.3 grain• Pointed Expanding 14.3 grainPremier quality and accuracy for .22 caliber airgun hunters! Single die production for exceptional shot-to-shot consistency.

Assortment includes 100 each of the highest quality pellets:

• Domed Magnum 14.3 grain

• Hollow Point 14.3 grain

• Super Point 14.3 grain

• Pointed Expanding 14.3 grain

Model	22BHPA
Τype	Domed-Hollow point-Super Point-Pointed Expanding
Cal.	.22
Head size	5,50 mm.
Weight	0.93
Weight grains	14.30
Qty/box	400
Ideal field of use :	Plinking, paste control
Recommended type of weapon :	12-37 ft.lbs/ 16 - 50 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 5 BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

BEITER NOCKS PIN  SYMMETRIC  HUNTER

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros