BEITER NOCKS PIN ASYMMETRIC #1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

Katana 9110 of period EDO (16^th century).

Model	9110
Code	9110
Total length	92 cm.
Length of blade	64 cm
Length of handle	23 cm
Description	Wooden  with bronze tsoumba and traditional           knitting on the handle
Weight	1340 gram.
Material	Zinc alloy

 There is not freight for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Centerpoint 1pc Off-set Dovetail Rings for 1" Scopes

Model	CPM1PA - 250OF.
Color	black
Gun Base	3/8’’ dovetail
Style	1-Piece
Ring Diameter	1’’
Profile	High
Min Inner Objective	56 mm.
Max Outer Objective	67 mm.
Integral Base Length	62 mm.
Ring Width	18 mm.
Saddle Height	21 mm.
Screws per Ring	4
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Rabbit Magnum II .177 Power

Very heavy hunting pellet for long ranges. Unique aerodynamic torpedo design. No contact with lead thanks to special copper coating (20 % harder than comparable lead pellets). Maximum possible impact and maximum penetration. Low deformation of pellet. Attention: For break-barrel guns only partially suitable.

Model	RABBIT MAGNUM II POWER
Τype	Pointed
Cal.	4,5 χιλ. (.177)
Head size	.177
Footsize [inches]	.187
Weight	1,04
Weight grains	16,05
10-Schot Grouping (inches) 25/5yds	-
Ballistic Soap Penetration (inches)	-
Expancion	-
B/C	0,041
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥ 18,5 ft.lbs/ 25 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

Brunox ® LUB & COR

High-Tec Maintenanceproduct

Application and effect

We are glad to present you our newest product BRUNOX® LUB & COR.

BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.

Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.

When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable.
BRUNOX® LUB & COR made it possible to protect the firearm over years.

Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day.
BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.

BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden.
Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.

BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.

RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 100ml .

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BEITER NOCKS PIN ASYMMETRIC #2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros