QUIVERS FOR TARGET AVALON TEC ONE

- Weight: 469 gr.

- Length: 30cm

- Direction: RH

- Features: 2 soundamping seperators, Incl. belt,  2 pockets, 2 d-rings to hold accessories, made of durable cordura

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER CARBON EXTENDER 5 ΄΄

The Extender of the Beiter Centralizer is a extension for the Beiter V-Bar - if you choose the model with Position Pins - or for most other V-Bars on the market - if used without pins. Beiter Extender can be ordered in 3", 4" or 5", without or with 1 Tuner (4" and 5" only).

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER NOCKS PIN  SYMMETRIC  HUNTER

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

Benjamin BDES 225

High quality, precision heavy weight pellets. Designed to compliment the power and accuracy of the Benjamin PCP guns, but these premium pellets will enhance the performance of any and all airguns,High quality, precision heavy weight pellets. Designed to compliment the power and accuracy of the Benjamin PCP guns, but these premium pellets will enhance the performance of any and all airguns,

Model	BDES 225
Τype	Hollow point
Cal.	6,35 mm (.25)
Head size	6,40 mm
Weight	1,81
Weight grains	27,80
Qty/box	200 / tin
Ideal field of use :	plinking, paste control
Recommended type of weapon :	≥ 18 ft.lbs/ 24 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN  BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

BEITER TRI-LINER FOR SPIN-WINGS

The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter. 
With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BOHNING GLUE

  Works on vanes, feathers, points, inserts & nocks

 • Works on all shaft surfaces

 • Clamp time 4 minutes, Full cure time 48 hours

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

W & W ECTENDER HMC 22 5 ΄΄

HMC 22 is WIN&WIN’s revolutionary new stabilizer constructed from modern high tensile strength carbon, making it stronger and stiffer. With its highly durable 3K carbon fabric surface, the HMC 22 stabilizing system has improved dampening qualities, shock absorbance and torque control.

Unlike other stabilizers the thickness of the HMC 22 tube wall varies, helping it to absorb high levels of shock very quickly. The rod wall measures 0.0275” (0.7mm) at the front and 0.0787” (2mm) at the base. This creates reduces movement at the end of the rod and absorbing vibration throughout the length of the stabilizer rather than pushing it back into the bow.

The freight, for all the deliveries to the Greek area is 6,00 euros