CARBON SHAFT AVALON TEC ONE

The straightness tolerance on the Avalon TEC ONE is the best in its price range in todays market. Its slim design prevents any wind drag on the outdoor field, making it an excellent arrow that will push your boundaries and take your scores to the next level.

-Full carbon shaft with straightness tolerance of ± .001"
- Pin insert included

Crosman 6177

Wadcutter pellets are ideal for paper targets. The flat nose punches a crisper, rounder hole in paper targets, for easy scoring. 250 Wadcutter pellets in a tin.

Model	6177
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,50 χιλ.
Weight	0,48
Weight grains	7,40
Qty/box	250
Ideal field of use :	shooting target
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 5 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

QUIVERS FOR TARGET AVALON A²

 Weight:174 gr.

- Length: 46cm

- Direction: RH and LH

- Color: Blue

- Features: 2 tubes, Incl. attachement hook, ambidextrous

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER NOCKS PIN ASYMMETRIC #1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.