H&N Finale match 4.49 mm pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH RIFLE 4,49
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,49 χιλ.
Weight	0,53
Weight grains	8,18
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

Specifications* Test Rifle: Walther LG300 (7,5 J); distance 10m

Cal. .177 (4,5mm)	Muzzle	10m	30m
Velocity (m/s)	175	-	-
Kinetic Energy (J)	7,5	-	-
Ballistic Soap Penetration (mm)	-	-	-
Ballistic Soap Expansion (mm)	-	-	-
10-Shot Grouping (mm)	-	5,0	-
Pellet Weight (g)	0,53	-	-
Headsize (mm)	4,49	-	-
Footsize (mm) 4,75	4,75	-	-
B/C	0,010	-	-

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

SHERIDAN 397

Timeless performance and dependable accuracy have kept this rifle on the favorites list for years.

This .177 caliber multi pump pneumatic features a sleek and lightweight American hardwood Monte Carlo stock and fully rifled brass barrel. With velocities up to 800 fps this rifle is perfect for small game and pests but equally as good for back yard target practice. Fully adjustable sights will help you zero in on your target or you can use the B272 intermount to attach a scope.

The freight is inclunding in the price for delivery in Greece.
You must be 18 years old to buy an air gun

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.

Gas Pro Hold Tape For Spin Vanes

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER NOCKS PIN ASYMMETRIC #1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.