|
ΒRUΝΟΧ® ΙΧ 50 SPREY 400 ML
|
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
|
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
|
Appearance
|
olive-yellow
|
Expect
Coverage
|
approx. 40 m2/l
with 5 my
|
Specific Gravity
|
0,838 ± 0,02 g/cm3
|
Viscosity (20oC)
|
25 mPa s – 120 mPa s
thixotrop
|
Lubrication
|
Bruggertest/DIN 51347
48 N/mm2
|
Flashpoint
|
Aerosol:<0 °C
Bulk: 51 °C
|
Consistence of the film
|
film non-hardening
|
Heat Resistance
|
up to 150 °C short time
up to 100 °C permanent
|
Before use
|
shake well
|
Can be used
|
for all metals
|
Freezing Point
|
below -41°C
|
Drying Time
|
evaporation of the solvents within 2-4 h
Hdepending on weather conditions
|
pH-Value
|
neutral
|
Corrosion
Protection
|
Indoor: up to 3 years
Outdoor: up to ½ year
Covered outdoor : up to 1 year
If you like a longer protection, control the film and renew it, if necessary
|
Film Property
|
penetrating
|
Film Thickness
|
5 – 20 my
|
Specifications
|
No
-silicon
-resins,
-PTFE
- acids
|
|
|
|
|
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
7,56EUR
|
|
|
|
|
Linder Kukri Set 450006
KUKRI LINDER 450006
|
Code
|
450006
|
Length of blade
|
7,87 “.
|
Blade
|
SS
|
Blade thickness
|
4,00 mm
|
Hardness
|
-
|
Total length
|
12,20 “
|
Length of handle
|
4,33 “.
|
Weight
|
241 gram.
|
Handle
|
metallic
|
Sheath
|
leather- metal (including)
|
The freight is 6€ for delivery into Greece.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
30,24EUR
|
|
|
|
MARTO SWORD 505 EL CID
|
SWORD Marto 505 El Cid.
The (Rodrigo Díaz de Vivar, 1048 - Valencia, 10 July 1099), known as El Cid Kampeador was Castilian nobleman, soldier and politician. He served as Generalissimo (alférez) the Castilian army under Sancho II of Castile, while exiled by his brother and successor of the latter Alfonso VI. The exile was made triggered the fictionalized life and work demonstrated since then, culminating in the conquest of the rich city of Valencia. Continued military triumphs against Christians and Muslims, and his habit of not reigns under the feudal mores of the time, made him dear to the Spanish people and a model for the knights of his homeland. After the death of his exploits, real and imaginary, as few sung by minstrels, creating a legend around his name. Considered a national hero of Spain.
The title El Cid , which is universally known , is derived from the Spanish article El , and the Arabic word سيد « Cindy " or " Sa'id " (master lord ) . The title Kampeador (Campeador) belongs to the Latin and vernacular can be attributed as "master of martial arts ."
The original sword is now in the Museum of Burgos and metallurgical analysis of the blade that had been made in 1999 , found that he had made in Córdoba and contained quantity and Damascus steel. The copy , which is manufactured by Marto is from forged steel with double-edged , without edge and 24K gold-plated handle . The blade has written over the text in gold letters .
Model
|
EL CID
|
Code
|
505
|
Total length
|
38 ΄΄
|
Blade length
|
31 ΄΄
|
Handle length
|
7 ΄΄
|
Weight
|
2 ,7 lb oz
|
Material
|
Forged Steel 440
|
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
|
|
269,00EUR
|
|
|
|
ΒRUΝΟΧ® ΙΧ 100 SPREY 300 ML
|
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
|
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
|
Appearance
|
olive-brown
|
Before use
|
shake well
|
Specific Gravity
|
0,886 ± 0,044 g/cm3
|
Dilutable
|
Can be diluted with White Spirit or Napar
With Dilution the corrosion protection interval will be also reduced.
|
Viscosity (20oC)
|
158 mPa s – 1580 mPa s thixotrop
|
Flashpoint
|
spray:<0 °C
bulk: 41 °C
|
Heat Resistance
|
max. 79 °C
|
Can be used
|
for all metals
|
Freezing Point
|
below -13 °C
spray below -41 °C
|
Drying Time
|
Not apply on humid surfaces.
Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®.
HDepending on weather conditions:
-dust-dry after approx.
1-2 h,
-hardened after approx. 12 h
|
pH-Value
|
Neutral
|
Film Property
|
Sealing
|
Film Thickness
|
25 – 50 my
|
Expected Coverage
|
ca. 20 m2/l with 25 my
|
Lubrication
|
no
|
Corrosion
Protection
|
depending on application up to 5 years
|
Consistence of the film
|
wax protection film
|
Specifications
|
No – silicon, PTFE
|
|
|
8,07EUR
|
|
|
|
BEITER PIN NOCK # 1
|
BEITER NOCKS PIN ASYMMETRIC #1
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
BEITER PIN NOCK
|
Weight
|
4.32 gr
|
Colors
|
Green, Orange, White, black, blue, purple
|
Package
|
1 piece
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
8,07EUR
|
|
|
|