SOCX WRAPS COMFORT X10 FOR SPIN-WING

When you are using spinwing like vanes, this really is the best way to dress your arrows.Extremly durable vinyl, amazing low weight and accurate marking lines for spinwing like vanes makes this product a must have for competitive archers!

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BEITER PIN OUT NOCK X-10 145/2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

·         JVD NETTING GREEN STANDARD

·         The height of the netting is between 2.85m and 3.20m.

·         The netting is available in fixed dimensions as shown below (no increments possible).

·         The netting is supplied with steel cable and rings.

·         The Standard netting weighs +/- 300 gr./m2 (compared to +/- 500 gr./m2 of the Extra Strong netting and +/- 1,000 gr./m2 of the Ultra Strong one).

Upon request, with 20% prepayment

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge. 

DENIX 720

Western Hut

The freight is including to the price  for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32

Tel. 0030 210 5225 007 - 0030 210 5234 425 

BEITER NOCKS PIN ASYMMETRIC #1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.