Chestguard AVALON TEC ONE

Chest guard from Avalon. Mesh outer panel with soft foam padded backing panel. Adjustable

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Hornet 4.5

Medium-weight, accurate hunting pellet for medium ranges. High impact and penetration. Aerodynamic design throught metal tip. Controlled expansion. Smooth with brass tip.

Model	HORNET
Τype	pointed with point
Cal.	4,5 χιλ. (.177)
Head size	4,50 χιλ.
Weight	0,57
Weight grains	8,80
Qty/box	200 / tin
Ideal field of use :	plinking, paste control ≥ 25 yds
Recommended type of weapon :	5,5 ft.lbs/ 7,5 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

CROSMAN D 177 airgun pellets  

Domed heavy pellets are the best choice for targeting at the range or in the field. 500 per tin. 7.9 grain. .177 caliber.

Model	6-D177
Τype	domed
Cal.	.177
Head size	4,50 mm.
Weight	0.512
Weight grains	7.9
Qty/box	500
Ideal field of use :	field target, paste control
Recommended type of weapon :	12-37 ft.lbs/ 16 - 50 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 5 BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

MARTO katana 328

Handmade katana by Marto, in Toledo Spain steel type AISI 440. Marto Katanas have forged and fully tempered stainless steel blades that have been polished and detailed. The blade does not rust and does not need further care. The casing is made of aluminum, lacquered.

Model	KATANA 328
Code	328
Total length	40,0  ΄΄
Blade length	27,3 ΄΄
Handle length	13,7΄΄
Weight	3,16 lb
Material	Forged Steel AISI 440

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

JSB  EXACT  KING 6.35

JSB Match Diabolo a.s. first model in cal.25! Of course, it is carefully designed, precisely produced and hand-pick quality controlled so very accurate. We are confident that your rifle will love them. As for its weight it is in the middle range so it is suitable for most air guns in this caliber (and you can expect heavier and lighter variants in the future). Muzzle velocity is 175 m/s if the power of airgun is set to 16J. Muzzle velocity is 250 m/s if the power of airgun is set to 50J. Muzzle velocity is 295 m/s if the power of airgun is set to 70J.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 5 BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

BEITER NOCKS PIN ASYMMETRIC #1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.