VERNEY CARRON   “ JET – 16 ”

An ideal weapon for those who want a gun for all hunts. Base from steel with 71 cm barrels, weight 3,000 kilos, stripe 7mm, pressure tested to 1370. Triggers 2 oil gun stock walnut. Extractors

Model	JET 16
Code order	JET 16
Weight	3.000 kg
System
Cal.	16 cal. /70
Overall length	115 c m
Capacity	2
choke	5 chokes
Rib	7 mm
wood	Sanded and oiled walnut
Sling swivels	Provided
ejections	extractors
triggers	2
receiver	steel
stock	pistole
Proof tested	1370

Beiter Wing-Holder

The Beiter Wing-Holder is designed to be the ideal complement to the functionality of the Beiter Tri-Liner. Whle the Beiter Tri-Liner allows to draw precise lines to be able to fletch vanes (e.g. Spin Wings™, Rite Flite™, Kurly Vanes™...): now, with the Beiter Wing-Holder, you can easily and precisely position and fletch the vanes on the shaft.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BEITER PIN OUT NOCK X-10 145/1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER NOCKS PIN ASYMMETRIC #2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

EASTON G PIN NOCK

Precision-molded, Press-fit Indexable.Fits all nock pins, for X10 and A/C/E shafts.Colors: Green, red, orange, lemon lime, crystal  and blue. Weight 4 gr.