.177 Caliber Marauder Rifle Magazine

Ten shot auto-indexing magazine for the .177 caliber Marauder Rifle.

code	RC 7710
description	cylinder MARAUDER 4,5 mm
capacity	10 shot
material	plastic
qty	1 piece
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Magazine A111-A112

The freight is 6,00 € for delivery into the Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

EASTON PIN NOCK CARBON 1

The freight, for all the deliveries to the Greek area is 6,00 euros 

EASTON PIN ΓΙΑ NOCK X 10

Τα είδη είναι διαθέσιμα και στο κατάστημα μας,

Στουρνάρη 61 Αθήνα 104 32.
 Τηλ. 210 5225 007 - 210 5234 425

Η παραγγελία σας επιβαρύνεται με έξοδα μεταφοράς 6,00 ευρώ για παραγγελίες εντός της Ελληνικής επικράτειας.

Spead loader kit for 1077-NS1200

Pre-load these three 12-shot clips for virtually uninterrupted shooting with the Crosman 1077..

code	0413
description	Set of 3 clips for 1077-NS1200
capacity	12 shot
material	plastic
qty	1 set
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

C11 / P10 / T11 Spare Clips

More clips means more shooting! Load up on BBs with these extra clips for your C11, P10 and T11 Air Pistols. Two per pack.

code	0481
description	Set of 2 magazines for C11 – C21 – C31 – P10 – T11
capacity	18 shot
material	metallic
qty	1 set
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

FLEX  PIN NOCK

Available in large and small throat sizes. Available in 6 colors: Black, green, orange, red, white.  Single cavity package for total consistency and precision.

Suitable for recurve target shooters.

The freight, for all the deliveries to the Greek area is 6,00 euros