TAB CARTEL SMART FINGER cordovan

  Smart Finger Tab is a top of the range cordovan tab in Cartel tap series.

   Made from smooth cordovan face, it has removable finger space and anchor shelf platform.

   The spare parts are designed to suit all sizes of tab and available both RH and LH.  

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BEITER  IN-OUT  NOCK

The Beiter Hunter Nock was designed for Compound Archers with D-Loop. Hunter Nocks are "symmetric" because only with this shooting style release and nock are in one line, that means this is the only symmteric way to shoot in archery.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and - very important - the Beiter Nock guarantees constant release from the bowstring, shot after shot!

The Beiter Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it, having ideal gliding surfaces.

FOR MORE INFORMATIONS PLEASE PRESS HERE

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros