Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BEITER  OUT  NOCK

The Beiter Out-Nock has been mainly designed for Carbon Arrowshafts, but can be used on some Aluminum-Carbon Arrows as well. The Beiter Out-Nock is available exclusively in the Beiter patented ASYMMETRIC shape.

 Remember to shoot with the Beiter logo on top!Some features of Beiter Nocks, that distinguish them from other makes:

 Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.

The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.

FOR MORE INFORMATION HERE