BEITER V-BAR

The Beiter V-Bar is the complement to the Beiter Extender with Pins and completes the Beiter Centralizer Stabilizer System.

Thanks to the Beiter V-Bar all other components - Long Rod, Side Rods, Extender with Pins or Extender 1 1/4"- can show up as a system which allows an optimal balance, dampening and absorption of vibrations

Your Beiter Centralizer Long Rod can fix directly the Beiter V-Bar to a Beiter Extender or a Beiter  Extender 1 1/4" to your bow.

Therefor your simply need a 28mm thread on your Beiter Long Rod, which is awailable as option without any additional charge!

The Beiter V-Bar is available in Black or Silver and in following versions: 90°x0°, 90°x17°, 70°x0° and 70°x17°.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

GRIPPER DOUBLE by AAE

The new Double gripper by AAE offers unmatched adjustment and stability for archers using double v-bars.  Featuring 7075 Aluminum the wider "Body" portion offers additional clearance while the tapered engagement provides maximum surface area contact for the ultimate in rigidity.  AAE's proprietary BLS (Bolt Lock System) automatically micro drives the parts out when the user loosens the bolt.  The BLS prevents unwanted seizing or binding common with anodization, allowing the user to quickly and easily make adjustments.  Laser etched reference marks allow the archer to monitor the smallest of adjustments.  The recessed mounting hole makes for a clean finished look when mounted. 

The freight, for all the deliveries to the Greek area is 6,00 euros 

ARCTEC CROSSTUBE STABILIZER LONG

Features Arctec Crosstube stabilizers:

·         Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness

·         Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.

·         Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)

·         Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)

·         Very low susceptibility to wind by only 16mm diameter – independent of wind direction

·         Easy fine-tuning made possible through stainless steel or aluminium weights

·         The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)

·         Packaging doubles as a protective cover (transparent  tube)

·         Handmade in Germany (Solingen)

Specifications:

·         Small-diameter three carbon layer using cross development technology rod with only 16mm diameter.

·         Weight: 140 grams at 32" (without weights and damper) - the stiffest rod with this small diameter on the market - 1/4" Arctec modular damping system - stainless steel weight (35 gram) and end weight (45 gram) included.

·         Optional aluminium weights with 15 grams available.

Available lengths:

·         Extender in 3", 4" and 5"

·         Side-rod in: 8", 10", 12" and 14"

·         Long-rod in: 28", 30", 32", 34" and 36"

 SPECIAL ORDER

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

STABILIZER BEITER

As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
 
Beiter Centralizer Long Rods are available with Endcap in following lengths: 26”, 28”, 30”, 33”, 35”, 37”, 41”, 45”; according to their length these can be ordered with 2, 3, 4 or 5 tuners.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros