MARTO SHRASAYA 202

The sirasagia were swords battle but when a blade should be stored for long, then the ADAPT a wooden handle and sheath made ​​of natural wood nurizaya to be able to preserve moisture and time.
Handmade katana by Marto, in Toledo Spain steel type AISI 420. It made ​​the process of forging and heat. The blade does not rust and does not need further care. The casing is made of wood with Japanese symbols on the handle and the tray ...

Model	SHRASAYA 202
Code	202
Total length	38,5  ΄΄
Blade length	27.36 ΄΄
Handle length	9,8΄΄
Weight	2,42 lb
Material	Forged Steel AISI 420

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

 MEYER  FLETCHER

With the new Meyer Fletching Jig Three at Once all three vanes can be fletched at the same time.

Significant differences to other products:

All lengths of vanes can be used

Supports all shaft diameters

The angle of the vane can be adjusted individually and repeatably set

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 JVD NETTING GREEN ULTRA STRONG

The JVD Netting Ultra Strong is the strongest netting on the market. This netting is not intended to be shot at directly, but serves as extra protection behind archery targets. Although that it is ultra strong netting, it might not stop all arrows. This depends on the bow and arrow used and the distance to the target / netting.*

Specifications:

·         The height of the Ultra Strong netting is 1.80m (in comparison: the Standard and Extra Strong netting have a height between 2.85 - 3.20m).

·         The lengths vary from 3m, 4m, to 5m & 25m special order

·         The Ultra Strong netting stops more arrows than the Extra Strong netting, because of the denser structure (higher density).

·         The Ultra Strong netting weighs +/- 1,000 gr./m2 (compared to +/- 500 gr./m2 of the Extra Strong netting and +/- 300 gr./m2 of the Standard one).

·         The netting is supplied with steel cable and rings.

Upon request, with 20% prepayment

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge.

Cleaning kit .22 cal

Rifle cleaning kit with three-piece plastic coated steel cleaning rod

CLEANING KIT .22 CAL
Overall length	80 cm
Handle	Anatomical from wood
Brushes	Wool, bristle & steel spiral

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BEITER  INSERT  NOCK

The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular specially on Aluminum-Carbon Arrows..

 The Beiter Insert-Nock is available in both the Beiter patented ASYMMETRIC shape, as well as in the SYMMETRIC Hunter-Nock. Remember to shoot with the Beiter logo on top!

Some features of Beiter Nocks, that distinguish them from other makes:

 Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.

The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.

 The above item is already in stock in our shop.

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros