|
|
BEITER V BOX
|
|
Beiter V-Box
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.
. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.
Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.
|
Damper Beiter V BOX
|
|
Material
|
elastic
|
|
Dimensions
|
1,38 ΄΄ (5/16-24)
|
|
Weight
|
49 gr.
|
|
Color
|
Βlack
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
|
40,00EUR
|
|
|
|
|
BOWSTRINGER FLEX
|
|
BOW STRINGER
Our FlexTringer is the best and safest bowstringer you can buy.
The limb to limb design are exclusive and prevent 100% limb bend or twist when you strung your bow.
Bowstringers that works on one tip or tip to tip force the more critical part of the limbs, the tip.
Our design works over the solid part of the limbs, adding life to your limbs.
Strong rubber cradles the full width of the limb .
Strong Cordage .
Easy adjust to all recurve bows
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
|
40,00EUR
|
|
|
|
|
MP 41
|
|
MP - 41
The MP-41 (M.P. 41) submachine gun (9x19 Luger/Parabellum) was developed by Hugo Schmeisser, son of the Louis Schmeisser who developed the first practical machine gun, the MP-18.At the time of development of MP-41, that is, in 1941, the company C.G.Haenel,at which Schmeisser was chiefdesigner, manufactured MP-40 submachine guns for German army. It is possible that Schmeisser decided to develop a submachine gun which was better suited for infantry use than the MP-40.For this reason, he combined the receiver, action and magazine of MP-40 with the wooden stock and selective-fire mechanism of MP-28.Haenel company produced more than few MP-41 submachine guns, which were mostly purchased by SS troops, which had their own supply chains. However, late in 1941 Erma company filed a patent infringement lawsuit against Haenel, and as a result, Haenel company was forced to close the production of MP-41. Only 26 700 guns of MP-41 pattern were made during the war, and most were issued to SS, SDand police troops.
|
Code
|
1024
|
|
Weight
|
3.150 gr.
|
|
Dimension
|
86 cm
|
|
Color
|
Black metal with wooden stock
|
|
Date of manufactoring
|
1941
|
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
|
221,79EUR
|
|
|
|
|
H&N BARACUDA HUNTER AIRGUN PELLETS / 400
|
|
H&N Baracuda Hanter .177 Caliber
Heavy and extremely precise hunting pellet for longest distances. Advanced "Baracuda"- Design with superb aerodynamic characterstics, best punch and controlled energy- transfer. Tightest groups. Less lead-fouling and uniform groups due to special alloy and greasing. Smooth with deep hollow point.
|
.Model
|
BARACUDA HUNTER 4,50
|
|
Τype
|
hollow point
|
|
Cal.
|
0.177
|
|
Head size
|
.177
|
|
Footsize [inches]
|
.187
|
|
Weight
|
0,67
|
|
Weight grains
|
10,34
|
|
10-Schot Grouping (inches) 25/50yds
|
0.31’’ / 1.2 ¨
|
|
Ballistic Soap Penetration (inches)
|
3,35’’
|
|
Ballistic Soap Εxpansion (inches)
|
0.59’’
|
|
B/C
|
0.020
|
|
Qty/box
|
400
|
|
Ideal field of use :
|
field target, paste control
|
|
Recommended type of weapon :
|
≥18.5 ft.lbs/ 25 j
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
FOR ORDERS MORE THAN 50,00 € OF PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6,00 € FOR DELIVERY INTO GREECE
|
|
|
7,36EUR
|
|
|
