Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

H&N Finale match 4.51 mm pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH RIFLE 4,51
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,51 χιλ.
Weight	0,53
Weight grains	8,18
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

Specifications* Test Rifle: Walther LG300 (7,5 J); distance 10m

Cal. .177 (4,5mm)	Muzzle	10m	30m
Velocity (m/s)	175	-	-
Kinetic Energy (J)	7,5	-	-
Ballistic Soap Penetration (mm)	-	-	-
Ballistic Soap Expansion (mm)	-	-	-
10-Shot Grouping (mm)	-	5,0	-
Pellet Weight (g)	0,53	-	-
Headsize (mm)	4,51	-	-
Footsize (mm) 4,75	4,75	-	-
B/C	0,010	-	-

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

357 Spare Clip

Spare clip for the 357 pistol (Model 3576W). Holds ten .177 caliber pellets.

code	80.04.300105
description	cylinder 357
capacity	10 shot
material	plastic
qty	1 piece
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

TAIGA

Taiga is a one piece bow inspired by oriental style and design. This bow is ideal for the archers looking for speed and lightness, composed by walnut handle and black fibreglass.

We include the freight in the prices, for all the deliveries to the Greek area. 

SWORD Marto 337.1 CHARLES THE 5^th

Charles the fifth (1500-1558 AD), the son of Philip and Joanna of 1519, who succeeded Maximilian (father's father), was Emperor of the Holy Roman Emperor and Archduke of Austria and was under the domination of an area of ​​4,000,000 square kilometers, in Europe, America and the Far East. They said it then, that the empire of the sun never sets. The kingdom became successful, though costly, Italian wars against the French, the conquest of Mexico and Peru, and the first circumnavigation of the Earth, from Magellan.

A copy of the sword Charles V built the famous sword maker, MARTO. The sword consists of gold-plated handle. The blade is forged steel 440 AISI symbols engraved on the blade.

Model	CHARLES THE 5th
Code	337.1
Total length	47,24  ΄΄
Blade length	37,00΄΄
Handle length	8,66΄΄
Open cross	9,00¨
Weight	7lb  oz
Material	Forged Steel 440

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.