BRUNOX LUBRI FOOD ® 400 ML
brunox® lubri-Food® High – Tec – Allrounder for the food industry
Product description Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).
Mode of working A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.
Application area All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.
Object To reduce friction and wear and therefore increases the life span of expensive food production equipment.
Application Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.
Apply a light, even film and allow BRUNOX® Lubri-Food® to react. Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result. Wipe off excess with cloth. BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.
Physical Properties
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Appearance
Transparent
Film Thickness
3 – 4 my
Specific Gravity
0,83 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
85 mPa s
Lubrication
Bruggertest/DIN 51347 25 N/mm2
Flashpoint
73 °C
Consistence of the film
film does non-hardening
Heat Resistance
up to 155 °C short time up to 125 °C permanent
Protection
-displaces humidity -stops limestone
Freezing Point
below -20 °C
Can be used
for all metals
pH-Value
neutral
Specifications
- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
Film Property
penetrating
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Brunox® turbo-spray® 100ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
transparent-bluish
1 – 2 my
0,82 ± 0,02 g/cm3
3 mPa s
Bruggertest DIN 51347 23 N/mm2
78 °C
Film non-hardening
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
-51 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
Corrosion Protection
up to 12 months indoor
Specification
contains no silicon, PTFE, graphite
Bohning Hot Melt Ferr-L-Tite
Designed for points & inserts. Works with aluminum & wood shafts. Heat reversible for adjustment, replacement or removal. 1 12 gram stick will do approximately 144 inserts.
The freight, for all the deliveries to the Greek area is 6,00 euros
BEITER CARBON EXTENDER 5 ΄΄
The Extender of the Beiter Centralizer is a extension for the Beiter V-Bar - if you choose the model with Position Pins - or for most other V-Bars on the market - if used without pins. Beiter Extender can be ordered in 3", 4" or 5", without or with 1 Tuner (4" and 5" only).
EXTENDER BEITER 5 ΄΄
Material
Carbon
Dimensions
5 ΄΄
Weight
gr.
Color
Βlack - grey
Outsid diam.
mm
HOYT LIMBS GRAND PRIX CARBON INTEGRA
Formula fitting recurve limbs from Hoyt.
Key features:
Designed by top recurve engineers and shooters, Carbon Integra limbs feature a new slimmer design for better performance and increased arrow velocity. This new design is a full 2 fps faster than the Carbon 840 limb and even smoother to draw. Made with pride in the U.S.A., Carbon Integra limbs are built from high quality hard rock maple, carbon and glass in a ISO 9001 certified factory. Available in Formula and Grand Prix, in short, medium and long lengths, and draw weights from 22 to 50 pounds in 2 pound increments.
Bamboo / Carbon
Size
66 – 68 – 70 ”
Power
22 – 50 lbs/ 2 lbs
Colors
Letter-opener 3074
Letter-opener inspired on the sabre of military order of St. George, Russia 1913. It was the highest military prize awarded to heroic military operations in the Russian Empire.
Model
3074
Code
Total length
24,5 cm.
Description
Bronze with ornaments on the handle.
81 gr.
Zinc alloy
The freight for delivery inτο Greece is 6 euro.
SF ARCHERY EXTENDER
Kevlar/carbon stabilizer. Ultimate is more up-graded stabilizer, which adds kevlar to carbon. This reduces effectively vibration and shocks . Carbon patterns on the surface are noce and looking good
ULTIMATE EXTENDER
4 ΄΄ or 5΄΄
Βlack
Samick IDEAL
The Samick Ideal is made from cast alluminium. It is economical and meets the archers of all levels. It can get a sight and stabilizer and other accessories..
SAMICK PRIVILEGE 23”
Handle
Right or left hand
Length
25”
Handle weight
1.040 grams
Colors (Painted)
Black, Red, Blue, Gray, White, Green, Yellow
The freight is 6,00 euros, for all the deliveries to the Greek area.