GAS PRO SPIN VANES 2" SOFT RECURVE BOW

Specifically for the recurve bows till 40 lbs.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

ARROWS SHAFT   EASTON A/C/E

·         Lightweight carbon fiber bonded to a precision 7075 alloy core

·         Guaranteed straightness: ± .0015”

·         9-micron polished carbon finish

·         Weight tolerance: ± 0.5 grains

·         Components—sold separately 

VERNEY CARRON    “SAGITTAIRE ONE”

A universal weapon for all type of  hunting. Receiver from ergal, barrel length 71 cm, weight 2.700 kg approximately 7 mm rib, tested in 1370 pressures and  for steel shot. Triggers 2. Oil pistol butt or English, walnut. Extractors. Choke fix ¼ - ¾ .  Barrels from steel super diamond, forged steel cold.

Model	SAGITTAIRE
Code order	242 71 P/A
Weight	2,700 Kg
System	Changable pins in front and conikal rear
Cal.	12 cal.
Overall length	115 c m
Capacity	2
choke	Standard choke 1/4 - 3/4
Rib	7 mm
wood	Sanded and oiled walnut
Sling swivels	Provided
ejections	extractors
triggers	2
receiver	ergal
stock	pistole (for english add 80,00 €) and for LEFT add 100,00 €
Proof tested	1370 + Steel shot proof tested.

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

DENIX 720

Western Hut

The freight is including to the price  for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32

Tel. 0030 210 5225 007 - 0030 210 5234 425