M4-177 Rifle (.177)

The next great variable pump rifle is here!  If you enjoy the adaptability of the AR platform then you're going to love the M4-177. The airgun features a rifled steel barrel and shoots both pellets and BBs. The rifle's variable pump action is easy to use for right or left-handed shooters.
Expect velocities up to 660 fps with BBs and 625 fps with 7.9gr, .177 caliber pellets.
There's plenty of picatinny rails for mounting your favorite accessories, plus the front and rear sights and stock are removable for the ultimate in upgrade possibilities.

·         Includes a Firepow'r 5-shot pellet clip

·         Reservoir capacity of 350 BBs

·         Adjustable stock to fit every shooter

·         Loop slots for adding a gun sling

·         Windage and elevation adjustments

·         Two aperture sizes instantly available on rear sight: just flip up the small one for stationary or bullseye targets or the large one for moving or large targets.

·         Removable magazine stores pellet clip and sight adjustment tool

CROSMAN M4-177 Rifle (.177)
Caliber:	0.177" (4.5mm)	Scopeable:	picatinny
Velocity:	625-660 fps	Buttplate:	Plastic adjustable
Loudness:	2-Low-Med	Suggested for:	Target practice
Barrel Length:		Trigger Pull:	-
Overall Length:	34”	Action:	Break barrel
Capacity:	5/350	Safety:	Manual
Cocking Effort:	-	Power Plant:	Pump
Barrel:	Rifled	Weight:	3 lbs 9oz
Front Sights:	Adjustable for windage and elevation	Rear Sights:	Adjustable for windage and elevation
Guaranty	1 year	Service-spare parts	in the near futures

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros