|
BEITER V BOX
|
Beiter V-Box
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.
. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.
Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.
Damper Beiter V BOX
|
Material
|
elastic
|
Dimensions
|
1,38 ΄΄ (5/16-24)
|
Weight
|
49 gr.
|
Color
|
Βlack
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
40,00EUR
|
|
|
|
IMMITATION DENIX 1098 L
|
DENIX 1098 L
Pocket pistol manufactured by Kumbley & Brum, London 1795
Model
|
POCKET PISTOL
|
Code
|
1098 L
|
Weight
|
420 gr.
|
Dimension
|
19,5 cm
|
Color
|
Black - Bronze
|
Handle
|
Similarly ivory
|
Date of manufactoring
|
18th century
|
AVAILABILITY
|
YES
|
The freight is including to the price for delivery inτο Greece.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
24,20EUR
|
|
|
|
IMITATION DENIX 1078/G
|
DENIX 1078 G
Flintlock pistol, 18th. Century
Model
|
PISTOL
|
Code
|
1078 G
|
Weight
|
770 gr.
|
Dimension
|
38 cm
|
Color
|
Grey
|
Handle
|
Wood
|
Date of manufactoring
|
18th century
|
AVAILABILITY
|
YES
|
The freight is including to the price for delivery inτο Greece.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
42,34EUR
|
|
|
|
BEITER V BOX ADAPTORS & FRONT SCREW
|
Adapters & Stainless steel front screw for Biter V-Box
Adapters & Stainless steel front screw
|
Material
|
Stainless steel
|
Adapters
|
14IN516
|
14IN516
|
14OUT516
|
14OUT516
|
|
|
|
Length
|
1”
|
2”
|
1”
|
2”
|
|
|
|
Weight in oz..
|
0,26
|
0,55
|
0,26
|
0,55
|
|
|
|
Maximum weight
|
3 oz
|
8oz
|
3 oz
|
8oz
|
|
|
|
|
|
|
|
|
|
|
|
Front screw
|
|
|
|
|
1”
|
2”
|
3”
|
Length
|
|
|
|
|
25,4
|
50,8
|
76,2
|
Weight in oz..
|
|
|
|
|
7.25
|
15.5
|
23.75
|
Maximum weight
|
|
|
|
|
1oz
|
5oz
|
11oz
|
|
A stainless steel screw 98mm (35,25 grams - 1,24 oz.) is available, NOT to be used for the V-BOX, but eventually on stabilizer systems with 5/16"-24 IN (e.g. a Beiter Centralizer with adapter 5/16"-24) - maximal possible weight 18 oz.!.
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight is 6,00€, for all the deliveries into the Greek area. |
|
42,34EUR
|
|
|
|
STABILIZER BEITER LONG
|
STABILIZER BEITER
As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
Beiter Centralizer Long Rods are available with Endcap in following lengths: 26”, 28”, 30”, 33”, 35”, 37”, 41”, 45”; according to their length these can be ordered with 2, 3, 4 or 5 tuners.
STABILIZER BEITER
|
Material
|
Carbon
|
Dimensions
|
30’’ – 33’’ – 35’’
|
Weight
|
gr.
|
Color
|
Βlack - grey
|
Outsid diam.
|
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
42,34EUR
|
|
|
|
JVD NETTING WHITE STANDARD
|
JVD NETTING WHITE STANDARD
- The height of the netting is 3.20m.
- The netting is available in fixed dimensions as shown below (no increments possible).
- The netting is supplied with steel cable and rings.
- The Standard netting weighs +/- 300 gr./m2 (compared to +/- 500 gr./m2 of the Extra Strong netting and +/- 1,000 gr./m2 of the Ultra Strong one).
JVD NETTING WHITE STANDARD
|
High
|
~ 3,20 m
|
Weight
|
300 gr/m2
|
Length in m.
|
3
|
4
|
5
|
8
|
9
|
10
|
15
|
20
|
50
|
Upon request, with 20% prepayment
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge. |
|
42,34EUR
|
|
|
|
ARCTEC PRO-XXL STABILIZER LONG
|
ARCTEC PRO-XXL STABILIZER LONG
DESCRIPTION
With the addition or removal of individual damping elements can the hardness of the shock on each bow be adjusted. The more elements are used, the harder the damper will be. Because of this, extremel yaccurate fine-tuning of the damping and of the balance of the bow is possible.
ARCTEC PRO-XXL STABILIZER LONG
|
Material
|
Carbon
|
Dimensions
|
28 ",30΄΄,32΄΄,34΄΄ and 36΄΄
|
Weight total
|
|
Color
|
Silver and black
|
Outsid diam.
|
|
SPECIAL ORDER
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
42,34EUR
|
|
|
|
LETTER-OPENER DENIX 3006
|
Letter-opener 3006
Letter-opener USA. Marine corps combat knife.
Model
|
3006
|
Code
|
3006
|
Total length
|
19 cm.
|
Description
|
With wooden handle
|
Weight
|
60 g.
|
Material
|
Zinc alloy
|
The freight for delivery inτο Greece is 6 euro.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
6,05EUR
|
|
|
|