Aluminium cleaning kit 12cal

Shotgun cleaning kit with three-piece aluminiumcleaning rod.

ALUMINIUM CLEANING KIT 12 CAL
Overall length	80 cm
Handle	Anatomical from wood
Brushes	Wool, bristle & steel spiral

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Avalon Tec One Target Quiver with Belt

Weight: 694 gr.

- Length: 46cm

- Direction: RH or LH

- Molded rubber arrow separator to prevent 'arrow wearing'

- 4 pockets

- Slot for pen & T-gauge

- 2 D-loop rings to hook your accessories

- Deluxe belt included

- Clip for accessories

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

QUIVERS FOR TARGET AVALON A²

 Weight:174 gr.

- Length: 46cm

- Direction: RH and LH

- Color: Blue

- Features: 2 tubes, Incl. attachement hook, ambidextrous

The freight, for all the deliveries to the Greek area is 6,00 euros 

Baracuda Hunter Extreme

Heavy, exceptionally accurate hunting pellet for long ranges. Deep, crossshaped hollow tip for tremendous shock effect and rapid energy transfer. Best  aerodynamic  properties for high accuracy. Smooth.

Model	BARACUDA HUNTER EXTREME
Τype	Hollow point
Cal.	5,5 χιλ. (.22)
Head size	.22
Footsize [inches]	-
Weight	1,21
Weight grains	19,09
10-Schot Grouping (inches) 25/50 yds	-
Ballistic Soap Penetration (inches)	-
B/C	-
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	12-37 ft.lbs/ 16 - 50 j

The above item will be in stock in our shop after 15/9/2012
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros