Beiter V-Box
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors. Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.
. How does the Beiter V-BOX system work? The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.
Where should, or can, the weight be attached? Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.
Damper Beiter V BOX
Material
elastic
Dimensions
1,38 ΄΄ (5/16-24)
Weight
49 gr.
Color
Βlack
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
SWORD Marto 603 Guardian sword
From the series of imaginary sword MARTO. The handle is ornate with 24k gold plated pieces and the blade forged steel 440
The sword one of the Knights of the Apocalypse.
Model
APOCALYPSE RIDER SWORD
Code
603
Total length
53.15 ΄΄
Blade length
38.78΄΄
Handle length
12.99΄΄
Open cross
11.21¨
10,5 lb oz
Forged Steel 420 Α
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
SWORD Marto 600 DEATH ANGEL
From the series of imaginary sword MARTO. The handle is ornate with 24k gold plated pieces and the blade forged steel 420
DEATH ANGEL
600
Forged Steel 420A
SWORD Marto 605 Attila
Attila (406-453), King of the Huns, nomadic tribe from Mongolia After he succeeded to the Roygila raided Thrace and Macedonia, where they forced the Emperor Theodosius to pay exorbitant ransom and natoy concede large tracts in the Danube valley. Invaded Russia and Germany and returning arrived until the Gaul. The 451 Katanalanika fields in the Aetio encountered by Army consisted of Romans, Gauls, Visigoths, etc. they defeated the much known Battle of Nations.
ATTILA
604
MARTO SHRASAYA 204
The sirasagia were swords battle but when a blade should be stored for long, then the ADAPT a wooden handle and sheath made of natural wood nurizaya to be able to preserve moisture and time. Handmade katana by Marto, in Toledo Spain steel type AISI 420. It made the process of forging and heat. The blade does not rust and does not need further care. The casing is made of wood with Japanese symbols on the handle and the tray ...
SHRASAYA 204
204
27,36 ΄΄
17.96 ΄΄
6,30΄΄
1,57 lb
Forged Steel AISI 420
BEITER INSERT NOCK
The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular specially on Aluminum-Carbon Arrows..
The Beiter Insert-Nock is available in both the Beiter patented ASYMMETRIC shape, as well as in the SYMMETRIC Hunter-Nock. Remember to shoot with the Beiter logo on top!
Some features of Beiter Nocks, that distinguish them from other makes:
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.
The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.
BEITER INSERT NOCK 19/1 & 19/ 2
19/1
19/1 Heavy
19/2
19/2/Heavy
19/2 Hunter
Weight gram.
0.53
0.62
0.60
0.69
0.70
Weight grains
8.154
9.538
9,231
10,615
10.769
Diam.
6,25 χιλ
Package
1 piece
SWORD Marto 602 Guardian sword
GUARDIAN SWORD
602
MARTO SHRASAYA 200
SHRASAYA 200
200
38,5 ΄΄
27.36 ΄΄
9,8΄΄
2,42 lb