|
CHARLES THE 5th MARTO SWORD
|
SWORD Marto 337.1 CHARLES THE 5th
Charles the fifth (1500-1558 AD), the son of Philip and Joanna of 1519, who succeeded Maximilian (father's father), was Emperor of the Holy Roman Emperor and Archduke of Austria and was under the domination of an area of 4,000,000 square kilometers, in Europe, America and the Far East. They said it then, that the empire of the sun never sets. The kingdom became successful, though costly, Italian wars against the French, the conquest of Mexico and Peru, and the first circumnavigation of the Earth, from Magellan.
A copy of the sword Charles V built the famous sword maker, MARTO. The sword consists of gold-plated handle. The blade is forged steel 440 AISI symbols engraved on the blade.
Model
|
CHARLES THE 5th
|
Code
|
337.1
|
Total length
|
47,24 ΄΄
|
Blade length
|
37,00΄΄
|
Handle length
|
8,66΄΄
|
Open cross
|
9,00¨
|
Weight
|
7lb oz
|
Material
|
Forged Steel 440
|
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
|
|
217,25EUR
|
|
|
|
MARTO SWORD 590 WALLAS
|
MARTO SWORD 590
WALLAS SWORD
The Wallace Sword is an antique claymore purported to have belonged to William Wallace (1272–1305), a knight and Scottish patriot who led a resistance to the English occupation of Scotland during the Wars of Scottish Independence. It is said to have been used by William Wallace at the Battle of Stirling Bridge in 1297 and the Battle of Falkirk (1298).The shaft of the sword measures 4 feet 4 inches (132 cm) in length and including the tip 5 feet 6 inches (168 cm). The breadth of the blade varies from 2.25 inches (5.7 cm) at the guard to 0.75 inches (1.9 cm) before the point. The sword weighs 6.0 pounds (2.7 kg).
It has been alleged that after William Wallace's execution in 1305, Sir John de Menteith, governor of Dumbarton Castle received the sword in August of that year. But there are no records to that effect. Two hundred years later, in 1505, accounts survive which state that at the command of King James IV of Scotland, the sum of 26 shillings was paid to an armourer for the "binding of Wallace' sword with cords of silk" and providing it with "a new hilt and plomet" and also with a "new scabbard and a new belt". This repair would have been necessary because, according to legend, Wallace's original scabbard, hilt and belt were said to have been made from the dried skin of Hugh Cressingham, one of the English commanders at the Battle of Stirling Bridge.No other written records of the sword are found for a further three centuries. In 1875 a letter from the War Office informed that the sword, in 1825 was sent to the Tower of London to be repaired. At that time it was submitted to a Dr Samuel Meyrick by the Duke of Wellington for examination.Dr Meyrick was an authority on ancient swords, but he estimated the age of the sword by examining the mountings only, which as we know were replaced early in the 16th century. Thus he concluded that the sword could not date from earlier than the 15th century. However, he did not take account of the blade, which must have been of some importance for James IV to have it bound in silk and give it a new scabbard, hilt and belt, and it was also described then as the "Wallas sword". The sword was recovered from Dumbarton by Charles Rogers, author of The Book of Wallace. Rogers, on 15 October 1888, renewed a correspondence with the Secretary of State for War, with the result that the Major General commanding forces in North Britain was authorised to deliver the weapon to his care for preservation in the Wallace Monument.
Model
|
WILLIAM WALLAS
|
Code
|
590
|
Total length
|
40,00 ΄΄
|
Blade length
|
΄΄
|
Handle length
|
΄΄
|
Weight
|
lb oz
|
Material
|
Forged Steel 440
|
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
|
|
185,50EUR
|
|
|
|
|
GILLO STABILIZER LONG GS8 CARBON
|
GILLO STABILIZER LONG GS8 CARBON
DESCRIPTION
GS8 High Module Carbon Stabilizers
· Extra stiff High Module 40 Ton Carbon tube with 3K mesh, matte finishing, for Long Rods and Extenders
· Extra stiff High Module 40 Ton and 30 Ton mixed Carbon tube with 3K mesh, matte finishing, for Short Rods
· Designed for Recurve and Compound use as well
· 15mm external diameter for minimum drift in side winds
· 3.5mm tube wall by cross carbon nets, for extreme stiffness
· 4.2 mm flexion @30”/1kg on tip, +-5%
· Black color anodized Aluminum terminations caps, 19 mm diameter
· Black oxidized steel termination screws, 1/4-20 UNC and 5/16-24 UNF
· Long rods available: 26”, 28”, 30”, 32”
· Short rods available: 10”, 12”, 15”
· Extenders available: 5”, 6”
GILLO STABILIZER LONG GS8 CARBON
|
Material
|
Carbon
|
Dimensions
|
26 ",28΄΄,30΄΄ and 32΄΄
|
Weight total
|
|
Color
|
Βlack
|
Outsid diam.
|
15 mm
|
SPECIAL ORDER
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
2.550,57EUR
|
|
|
|
CLEANING KIT 5,5 MM
|
Model |
CLEANING KIT 5,5 MM FOR AIR GUNS |
Retail price |
9,00 |
qty |
pieces |
Material |
brass cleaning rod |
code |
101.005,5 |
Internet price |
8,00 |
|
| |
|
8,07EUR
|
|
|