|
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
|
Technische Daten
|
|
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
|
|
Appearance
|
olive-brown
|
Before use
|
shake well
|
|
Specific Gravity
|
0,886 ± 0,044 g/cm3
|
Dilutable
|
Can be diluted with White Spirit or Napar
With Dilution the corrosion protection interval will be also reduced.
|
|
Viscosity (20oC)
|
158 mPa s – 1580 mPa s thixotrop
|
|
Flashpoint
|
spray:<0 °C
bulk: 41 °C
|
|
Heat Resistance
|
max. 79 °C
|
Can be used
|
for all metals
|
|
Freezing Point
|
below -13 °C
spray below -41 °C
|
Drying Time
|
Not apply on humid surfaces.
Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®.
HDepending on weather conditions:
-dust-dry after approx.
1-2 h,
-hardened after approx. 12 h
|
|
pH-Value
|
Neutral
|
|
Film Property
|
Sealing
|
|
Film Thickness
|
25 – 50 my
|
|
Expected Coverage
|
ca. 20 m2/l with 25 my
|
|
Lubrication
|
no
|
Corrosion
Protection
|
depending on application up to 5 years
|
|
Consistence of the film
|
wax protection film
|
Specifications
|
No – silicon, PTFE
|
|
