|
ΒRUΝΟΧ® ΙΧ 50 SPREY 400 ML
|
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
|
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
|
Appearance
|
olive-yellow
|
Expect
Coverage
|
approx. 40 m2/l
with 5 my
|
Specific Gravity
|
0,838 ± 0,02 g/cm3
|
Viscosity (20oC)
|
25 mPa s – 120 mPa s
thixotrop
|
Lubrication
|
Bruggertest/DIN 51347
48 N/mm2
|
Flashpoint
|
Aerosol:<0 °C
Bulk: 51 °C
|
Consistence of the film
|
film non-hardening
|
Heat Resistance
|
up to 150 °C short time
up to 100 °C permanent
|
Before use
|
shake well
|
Can be used
|
for all metals
|
Freezing Point
|
below -41°C
|
Drying Time
|
evaporation of the solvents within 2-4 h
Hdepending on weather conditions
|
pH-Value
|
neutral
|
Corrosion
Protection
|
Indoor: up to 3 years
Outdoor: up to ½ year
Covered outdoor : up to 1 year
If you like a longer protection, control the film and renew it, if necessary
|
Film Property
|
penetrating
|
Film Thickness
|
5 – 20 my
|
Specifications
|
No
-silicon
-resins,
-PTFE
- acids
|
|
|
|
|
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
7,56EUR
|
|
|
|
SHIBUYA ARROW REST
|
Shibuya Ultima Recurve Magnetic Rest RH/LH
The Ultima Recurve Rest's Support Arm makes use of DLC-coating – a technology offering a good material strength and friction properties, applied in fields such as parts for racing engines. As a result, the energy loss inflicted on an arrow gliding over the arm is reduced to a minimum. The Support Arm's Offset construction guarantees no contact with the cushion plunger's barrel, even when used with the smallest diameter shafts.
The Ultima Recurve Rest is adjustable not only vertically, to ensure compatibility with any size arrow shaft, but also horizontally to compensate for sight window depth and plunger settings. There is no need to cut or bend the support arm again! Adjustments are easy to make with one screw, even when the arrow is rested on the support arm.
The line of magnetic force between the Ultima Recurve Rest's dual magnets catches and returns the Support Arm safely and repeatable, exponentially increasing the reliability of the rest. Shibuya uses only high quality corrosion-resistant samarium cobalt magnets, known for their constant magnetic force independent of temperature changes.
By placing the adjustment screw between the magnets, Shibuya was able to maintain a slim construction (only 3.8mm including adhesive tape), while at the same time using a 3mm screw for comfortable, safe adjustments.
For attachment to the bow riser, Shibuya is employing industrial-strength double-sided adhesive tape. The flexible, thick tape is ideal for ensuring a lasting and reliable bond.
Ultima Recurve Rest can be switched between RH and LH simply by reversing the support arm's fastening direction.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
7,56EUR
|
|
|
|
OVER AND UNDER VERNEY CARRON SAGITTAIRE SUPER LEGER EXTRACTORS
|
VERNEY CARRON “SAGITTAIRE SUPER LEGER”
The version of Super Leger based from ergal, barrel length 66 cm, weight ≈ 2,700 pounds rib 7mm, proven in 1370 and pressures for steel shot. Triggers 2, the first one works like single trigger. Oil stock, pistol or English, walnut. Extractors Barrels from steel super diamond, forged steel cold. Supplied with 3 choke internal
Model
|
SAGITTAIRE SUPER LEGER
|
Code order
|
242 CX 66 P/A
|
Weight
|
2.700 kg
|
System
|
Changable pins in front and conikal rear
|
Cal.
|
12 cal. /76 magnum
|
Overall length
|
110 c m
|
Capacity
|
2
|
choke
|
3 chokes
|
Rib
|
7 mm
|
wood
|
Sanded and oiled walnut
|
Sling swivels
|
Provided
|
ejections
|
extractors
|
triggers
|
2
|
receiver
|
ergal
|
stock
|
pistole (for english add 75,00 €) and for LEFT add 149,00 €
|
Proof tested
|
1370 + Steel shot proof tested.
|
|
|
1.663,41EUR
|
|
|
|
ΒRUΝΟΧ® LUB & COR SPRΑY 125 ML
|
Brunox ® LUB & COR
High-Tec Maintenanceproduct
Application and effect
We are glad to present you our newest product BRUNOX® LUB & COR.
BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.
Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.
When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable.
BRUNOX® LUB & COR made it possible to protect the firearm over years.
Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day.
BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.
BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden.
Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.
BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.
RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 125ml High-Tec-Sprayer. The spray-can works without propellant. It will be delivered in multilingual (DE/FR/NL/IT/GB) alum cans. Each box contains 12 cans.
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
6,65EUR
|
|
|