Brunox® turbo-spray® 100ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,82 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
3 mPa s
Lubrication
Bruggertest DIN 51347 23 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-51 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
DOINKER STABILIZER AVANCEE LONG
DESCRIPTION
The Avancée is a good choice for recurve shooters of all levels due to it's ultra light design and low wind drag geometry. It uses a very light, stiff Carbon Grid rod with an Outside Diameter of .640 thousand of an inch. It also includes a fully adjustable 7/8" Doinker Supreme and D.A.W.G. weights at the Distal end. The Avancée also features a Doinker Thumb Spur hole at the base of the stabilizer that allows you to tighten the stabilizer firmly to the bow. (Thumb Spur sold seperately).
Size Weight Avancee Carbon Stabilizer 18" 4.3oz Avancee Carbon Stabilizer 24" 4.7oz Avancee Carbon Stabilizer 27" 5.0oz Avancee Carbon Stabilizer 30" 5.2oz Avancee Carbon Stabilizer 34" 5.5oz
Material
Carbon
Dimensions
18΄΄,24΄΄,27΄΄,30΄΄and 34΄΄
Weight total
Color
Black
Outsid diam.
17mm
SPECIAL ORDER
Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
W&W V-BAR CX 2 CARBON
Though most shock that occurs when shooting is absorbed by a stabilizer and V-Bar, some vibration returns to the riser and makes consistent accuracy difficult.
WIN&WIN’s new CX2 V-Bar is designed to absorb shock more efficiently, and increase shooting consistency by minimizing the vibration that returns back into the riser..
10 x 2.5 cm
Weight
86,50 gr.
Βlack
Opening angle
45°
CONQUEST STABILIZER SMACDOWN .625 LONG
Target stabilizer from Conquest.
Key features:
· Small diameter stabilizer for minimal wind disruption.
· Impressive stiffness to weight ratio.
· Incorporated SMACWRAP dampening for a comfortable shot.
· Designed to minimise hand shock.
· Connectors made for easy tightening when mounting onto your bow.
Technical specifications:
Outside Diameter:
.625 (5/8th")
Material:
Carbon.
Included Accessories:
3x 1oz weights
Weight Thread Size:
5-16/24
24 ",27", 30 " and 33 "
16 mm
SPECIAL ORDER Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
DOINKER STABILIZER LONG HERO ULTRA HI-MOD
DESCRIPTION Target Stabilizer from Doinker.
· Great for those using higher amounts of stabilizer weight - holds over 20oz with little flex.
· Small outside diameter for optimal use in windy conditions.
· Best carbon technology.
· Efficent energy transfer.
0.575"
Short Rod Lengths:
10", 12" or 15" (see related items below)
Long Rod Lengths:
24", 27" 30" or 33"
Extender Lengths:
Included accessories:
Doinker EXO damper and adapter screws
24΄΄,27΄΄,30΄΄ and 33΄΄
Weight tota
14.5 mm
BRUNOX LUBRI FOOD ® 50 ML
brunox® lubri-Food® High – Tec – Allrounder for the food industry
Product description Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).
Mode of working A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.
Application area All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.
Object To reduce friction and wear and therefore increases the life span of expensive food production equipment.
Application Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.
Apply a light, even film and allow BRUNOX® Lubri-Food® to react. Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result. Wipe off excess with cloth. BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Transparent
3 – 4 my
0,83 ± 0,02 g/cm3
85 mPa s
Bruggertest/DIN 51347 25 N/mm2
73 °C
film does non-hardening
up to 155 °C short time up to 125 °C permanent
Protection
-displaces humidity -stops limestone
below -20 °C
Can be used
for all metals
Specifications
- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids