Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
Easton Shaft X23 Limited Edition
The Golden Anniversary of an unstoppable force in target archery! It was born from a desire for the ultimate in performance and precision. The strongest available alloy combined with Easton's still-secret processes and Jim Easton's unrelenting drive for perfection yielding the legendary Easton X7 - quite possibly, the most-winning single sporting goods product in history. X7 is still an unstoppable force on the podium, just as it was beginning in 1965.
Easton celebrates 50 years of X7 Olympic Gold Medals, Vegas Championships and countless other victories, with the Golden Anniversary X23 and X27 Limited Edition shafts. Dual-anodized and individually laser-etched with Jim and Greg Easton's signature, these one-of-a-kind shafts will be produced in very limited numbers, only for the 2015-16 indoor season.
Optimized for maximum diameter, indoor, World Archery regulation competition
Precision and proven X7 alloy performance
7178-T9 aerospace alloy
Diamond polished anodized silver finish
Guaranteed straightness: ± .001"
Weight tolerance: ± 3/4%
Strength (psi) 105,000
Archery Style: Compound Target, 3D Archery
Material: Aluminium
Uni Bushing included
All other components sold separately
EASTON INSPIRE
SIZE
SHAFT WEIGHT
Grains/inch
SPINE
LENGTH
inch
WEIGHT OF POINTS
grains
NOCK
2312
9.5
0.423
33.00
100
SUPER NOCK
2314
10.8
0.391
33.50
2315
11.8
0.340
34.00
Package 6 pieces
Coppa Spitzkugeln
Light-weight, copper plated pellet for plinking and hobby. No lead-fouling, low deformation and high penetration thanks to special copper coating (20% harder than comparable lead pellets).
Model
SPITZKUGELN COPPA
Τype
pointed
Cal.
5,5 mm (.22)
Head size
5,50 χιλ.
Weight
1,04
Weight grains
16,05
Qty/box
200 / TIN
Ideal field of use :
plinking, paste control
Recommended type of weapon :
5,5-12 ft.lbs/ 7,5-16 j
FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE
EASTON GENESSIS
7075 Aerospace alloy finish
Hard-anodized finish
Guaranteed straightness: ± .005
Colors: Bright Blue or Orange
Weight tolerance: ± 2.5%
Strength (PSI): 90,000
UNI Bushing -installed (G UNI Bushing)
Components sold separately
N Nock
One-Piece Point
If you buy more than 12pieces, the freight is free for deliveries into the Greek area.