|
Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application
for
• maintenance •cleaning • repair works
• production • storage • transportation
of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC
|
Physical Properties
|
|
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
|
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
|
Specific Gravity
|
0,82 ± 0,02 g/cm3
|
Expect Coverage
|
approx. 100 – 120 m2/l
|
|
Viscosity (20oC)
|
3 mPa s
|
Lubrication
|
Bruggertest DIN 51347
23 N/mm2
|
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
|
Freezing Point
|
-51 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
