Centerpoint 2pcs  Dovetail Rings for 1" Scopes

Model	CPM2PA – 25Η
Color	black
Gun Base	3/8’’ dovetail
Style	1-Pair
Ring Diameter	1’’
Profile	High
Min Inner Objective	56 mm.
Max Outer Objective	67 mm.
Integral Base Length	-
Ring Width	21 mm.
Saddle Height	21 mm.
Screws per Ring	4
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

TARGET TRAP 850

The Crosman Target Trap stops pellets. Our exclusive triple-safety curtains are backed with heavy-gauge galvanized steel. Paper targets are included depicting various silhouetted animals.

The Target Trap is recommended for use with airguns that do not exceed:
750 fps in .22 caliber
650 fps in .20 caliber
800 fps in .177 caliber

It is not recommended for use with .25 caliber airguns or with metal-tipped pellets.

 Dimensions 9.75 x 8.25 x 10 "

.177 Caliber Marauder Rifle Magazine

Ten shot auto-indexing magazine for the .177 caliber Marauder Rifle.

code	RC 7710
description	cylinder MARAUDER 4,5 mm
capacity	10 shot
material	plastic
qty	1 piece
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

 Micrometer adjustable sights FP series

Internal micrometer adjustments have positive internal locks.  The FP is strong, rugged, dependable.  The alloy used to manufacture this sight has a tensile strength of 85,000 pounds.  Yet, the FP is light and compact, weighing only 1-1/2 ounces.  For grooved receivers on Airguns and .22 rifles (High line of sight)

Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE