Brunox ® IX 50
High – Tec – long-term corrosion inhibitor Application and effect • high-quality lubricant • long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required. It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance
olive-yellow
Expect Coverage
approx. 40 m2/l with 5 my
Specific Gravity
0,838 ± 0,02 g/cm3
Viscosity (20oC)
25 mPa s – 120 mPa s thixotrop
Lubrication
Bruggertest/DIN 51347 48 N/mm2
Flashpoint
Aerosol:<0 °C Bulk: 51 °C
Consistence of the film
film non-hardening
Heat Resistance
up to 150 °C short time up to 100 °C permanent
Before use
shake well
Can be used
for all metals
Freezing Point
below -41°C
Drying Time
evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value
neutral
Corrosion Protection
Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property
penetrating
Film Thickness
5 – 20 my
Specifications
No -silicon -resins, -PTFE - acids
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
VERNEY CARRON “SAGITTAIRE XS 20 CX 66/71”
An ideal weapon for those who want a light gun and without much recoil. Base from ergal,with side plates, barrel length 66 or 71 cm, weight about 2,500 kg, stripe 7mm, proven in 1370 pressures and steel shot magnum. Triggers 2, the first to operate as single-trigger Stock oil semi-pistol or agkle from walnut.. Supplied with 3 internal choke. Extractors.. Barrels from steel super diamond, forged steel cold.
Model
SAGITTAIRE XS 20 EXTRA LUXE
Code order
262 XS 20 CX 66/71
Weight
2.500 kg
System
Changable pins in front and conikal rear
Cal.
20 cal. /76 magnum
Overall length
110 / 115 c m
Capacity
2
choke
Standard choke ¾ - extra full
Rib
7 mm
wood
Sanded and oiled walnut
Sling swivels
Provided
ejections
extractors
triggers
receiver
ergal
stock
pistole (for english add 75,00 €) and for LEFT add 149,00 €
Proof tested
1370 + Steel shot proof tested.
Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
transparent-bluish
1 – 2 my
0,82 ± 0,02 g/cm3
approx. 100 – 120 m2/l
3 mPa s
Bruggertest DIN 51347 23 N/mm2
78 °C
Film non-hardening
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
-51 °C
evaporation of the solvents within 2-4 h. H depending on weather conditions
up to 12 months indoor
Specification
contains no silicon, PTFE, graphite
CLEANING KIT 4,5 MM FOR AIR GUNS
Retail price
9,00
pieces
plastic coated steel cleaning rod
101.104,5
8,00
Brunox ® LUB & COR
High-Tec Maintenanceproduct
We are glad to present you our newest product BRUNOX® LUB & COR.
BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.
Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.
When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable. BRUNOX® LUB & COR made it possible to protect the firearm over years.
Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day. BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.
BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden. Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.
BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.
RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 100ml .
Shooting Chrony Remote Control for Beta & Gama Chronograph
Shooting Chrony Beta & Gama chronograph can be operated from a distance using the cable button. This are 2 the case of Beta & Gama
REMOTE CONTROL FOR SOOTINGCHRONY CHRONOGRAPH
Length
244 cm
100 gr
FOR MANUAL PRESS HERE
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
