Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

A BB-BATTERY PACK

A BB- Battery Pack is also available to power this Chrony LED Lamp (C.L.L.) in the countryside or where there is no 120V/220V power.
BB-Battery Special Features:
• Can power the C.L.L. more than 18 hours continuous use
• 2.3Amp-Hour, 12V rechargeable battery. It can be recharged from the cigarette lighter socket of the vehicle, or from any 120/220-Volt AC wall outlet
• The Red LED indicates the charger is plugged in. The GREEN LED indicates a full charge of the battery
• Automatic overcharge protector
• Use as a 12-Volt emergency power source for most 12-Volt appliances that are equipped with a center-pin-positive cigarette lighter plug such as games, cell phone charger, palmtop computers, flashlights, heated clothing etc.a set of 16” Wire-Rods. 120V/220VAC adapter included (12VDC output @500mA).

Model	LED SHOOTING LIGHT FIXTURE
Input	220 / 12 V
Output	12 V
Dimensions	18 x 3,6 x 7 cm
Weight	1005 gr
Length of cable	30 cm

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425